CY7C1012AV25 Datasheet, PDF (1/9 Pages) Cypress Semiconductor – 512K x 24 Static RAM

PRELIMINARY
CY7C1012AV25
512K x 24 Static RAM
Features
• High speed
— t_AA = 8, 10, 12 ns
• Low active power
— 1080 mW (max.)
• Operating voltages of 2.5 ± 0.2V
• 1.5V data retention
• Automatic power-down when deselected
• TTL-compatible inputs and outputs
• Easy memory expansion with CE₀, CE₁ and CE₂
features
Functional Description
The CY7C1012AV25 is a high-performance CMOS static
RAM organized as 512K words by 24 bits. Each data byte is
separately controlled by the individual chip selects (CE₀, CE₁,
CE₂). CE₀ controls the data on the I/O₀–I/O₇, while CE₁
controls the data on I/O₈–I/O₁₅, and CE₂ controls the data on
the data pins I/O₁₆–I/O₂₃. This device has an automatic
power-down feature that significantly reduces power
consumption when deselected.
Functional Block Diagram
Writing the data bytes into the SRAM is accomplished when
the chip select controlling that byte is LOW and the write
enable input (WE) input is LOW. Data on the respective
input/output (I/O) pins is then written into the location specified
on the address pins (A₀–A₁₆). Asserting all of the chip selects
LOW and write enable LOW will write all 24 bits of data into
the SRAM. Output enable (OE) is ignored while in WRITE
mode.
Data bytes can also be individually read from the device.
Reading a byte is accomplished when the chip select
controlling that byte is LOW and write enable (WE) HIGH while
output enable (OE) remains LOW. Under these conditions, the
contents of the memory location specified on the address pins
will appear on the specified data input/output (I/O) pins.
Asserting all the chip selects LOW will read all 24 bits of data
from the SRAM.
The 24 I/O pins (I/O₀–I/O₂₃) are placed in a high-impedance
state when all the chip selects are HIGH or when the output
enable (OE) is HIGH during a READ mode. For further details,
refer to the truth table of this data sheet.
The CY7C1012AV25 is available in a standard 119-ball BGA.
INPUT BUFFER
A₀
A₁
A₂
A₃
A₄
A₅
A₆
512K x 24
ARRAY
4096 x 4096
A₇
A₈
A₉
I/O₀–I/O₇
I/O₈–I/O₁₅
I/O₁₆–I/O₂₃
COLUMN
DECODER
CONTROL LOGIC
CE₀, CE₁, CE₂
WE
OE
Selection Guide
Maximum Access Time
Maximum Operating Current
Maximum CMOS Standby Current
-8
-10
-12
Unit
8
10
12
ns
Commercial
300
275
260
mA
Industrial
300
275
260
Commercial/Industrial
50
50
50
mA
Cypress Semiconductor Corporation • 3901 North First Street • San Jose, CA 95134 • 408-943-2600
Document #: 38-05337 Rev. **
Revised January 27, 2003