ILTS Datasheet, PDF (1/2 Pages) Cynergy3 Co – Submersible Dual Level and Temperature Transmitter

ILTS series
Submersible Dual Level & Temperature Transmitter
Stainless steel, piezo-resistive sensor
Level accuracy: <0.1% FS BFSL
Pressure ranges from 1mWG to 10mWG
Temperature range: -20 to +60ºC
Dual independent 4-20mA outputs
Suitable applications
River level & temperature Reservoir level & temperature
Tank level & temperature Borehole level & temperature
Aquifer level & temperature Environmental monitoring
V-notch weir flow measurement
Pressure Ranges
Nominal Pressure, Gauge mWG
1
5
10
Permissible Overpressure mWG
20
50
50
The ILTS is designed for use in continuous
submersion in liquids such as water, oil and
fuels. The probe uses the latest piezo-
resistive media-isolated silicon sensing
technology and a stainless steel diaphragm.
Housed within a 316L stainless steel, or
high grade Duplex stainless steel housing,
this submersible transmitter is the ideal
product for hydrostatic level measurement
where temperature is also a critical part of
the measurement.
It offers excellent stability, repeatability and
resolution, as required for use in rivers and
reservoirs.
This type incorporates a Class ‘B’ accuracy
platinum resistance thermometer.
Every device is temperature compensated,
calibrated and supplied with a traceable
serial number and calibration certificate.
Custom versions can be made for particular applications.
Temperature Range
Temperature range
ºC
-20 to +60
Level Performance
Accuracy (Non-Linearity & Hysteresis) <±0.1% / FS (BFSL)
Setting Errors (offsets)
Zero & Full Scale, <±0.5% / FS
Permissible Load
Influence Effects
R_max = [(Voltage Supply-9)/0.02]Ohms
Supply
<0.005% FS / 1V
Load
0.05% FSO / kOhm
Temperature Performance
Measurement Accuracy
Thermal drift
Loop Voltage effect
Maximum output load
Output Timing
(mA output/2000) or 5µA (whichever is the greater)
1 µA/ºC
0.2µA/V
[(Vsupply-10)/21] kOhms
(Example: 700 Ohms @ 24V)
Transmitter start up time: 4 seconds (I out <4mA during
start up)
Warm up time: 1 minute to full accuracy
Update time: 500ms
Response time: 1 second
Output Signals and Supply Voltages
Output
Supply Voltage
Level (2-wire)
4-20mA
9-32Vdc
Connection Wire Colours
+ve Supply Red
-ve Supply Blue
Ground
Green
& Cable Screen
Cynergy3 Components Ltd.
7 Cobham Road
Ferndown Industrial Estate
Wimborne, Dorset BH21 7PE
Telephone [phone]
Temperature (2-wire) 4-20mA
9-32Vdc
+ve Supply White
-ve Supply Yellow
Ground
Green
& Cable Screen
Email:[e-mail]
Web: www.cynergy3.com
ISO9001 C E R T I F I E D
www.cynergy3.com
© 2014 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited.