DS-72-35 Datasheet, PDF (8/14 Pages) Cymbet Corporation – EnerChip™ RTC Evaluation Kit

Preliminary
CBC-EVAL-12-34123 EnerChip RTC Evaluation Kit
13. There should now be an EVAL12 Demo Shortcut icon on your desktop, as shown below. Double-click on the
icon to launch the Graphical User Interface (GUI).
GUI installation is now complete. The following window should appear.
14. Insert the CBC-EVAL-12-34123 dongle into the USB port. It can take up to a minute for the computer to
recognize the new hardware.
15. Both red LEDs on the EVAL stick - one on the USB board and the other on the Tab Board - should be lit.
Click the ‘Connect’ button on the GUI. The computer’s system time should now appear active in the GUI. At the
top right of the window, ‘CBC-TAB-34123 Found’ is indicated, along with ‘Messages: RTC Connected’ at the
top left.
©2013 Cymbet Corporation • Tel: [phone] • www.cymbet.com
DS-72-35 V0.7

Page 8 of 14