VQ-120B Datasheet, PDF (1/4 Pages) CUI INC – AC/DC Metal Enclosed

A CUI INC COMPANY
VQ-120 Series AC/DC Metal Enclosed
8"x 4"x 2.0", 88~132VAC, 120W, QUADRUPLE OUTPUT
.LOW COST, HIGH RELIABILITY
.COMPACT SIZE, LIGHT WEIGHT
.105ºC OUTPUT CAPACITOR
.100% FULL LOAD BURN-IN TEST
.INTERNATIONAL AC INPUT RANGE
.BUILT IN EMI FILTER, LOW RIPPLE NOISE
.HIGH EFFICIENCY, LOW WORKING TEMPERATURE
.SOFT-START CIRCUIT, LIMITING AC SURGE CURRENT
.SHORT CIRCUIT, OVERLOAD, OVER VOLTAGE PROTECTED
SPECIFICATION
MODEL
VQ-120B
VQ-120C
VQ-120D
CH1 CH2 CH3 CH4 CH1 CH2 CH3 CH4 CH1 CH2 CH3 CH4
DC OUTPUT VOLTAGE
OUTPUT V. TOLERANCE
OUTPUT RATED CURRENT
5V 12V -5V -12V 5V 15V -5V -15V 5V 12V 24V -12V
±2%
±6%
±6%
±6%
±2%
+10,-
5%
±6%
+10,-
5%
±2%
±6%
±6%
±6%
11A 4A 1A 1A 10A 3.5A 1A 1A 8A 2A 2A 1A
OUTPUT CURRENT RANGE
2-12A 0.5-5A 0.2-1A 0.2-1A 2-12A 0.5-5A 0.2-1A 0.2-1A 2-12A 0.2-5A 0.2-2A 0.2-1A
RIPPLE & NOISE (p-p)
80mV 120mV 80mV 120mV 80mV 150mV 80mV 150mV 80mV 120mV 180mV 120mV
LINE REGULATION
±0.5% ±1% ±1% ±1% ±0.5% ±1% ±1% ±1% ±0.5% ±1% ±1% ±1%
LOAD REGULATION
DC OUTPUT POWER
±0.5% ±5% ±5% ±5% ±0.5% ±6% ±5% ±6% ±0.5% ±5% ±5% ±5%
120W
122.5W
124W
EFFICIENCY
DC VOLTAGE ADJ.
77%
CH1:+10,-5%
76%
CH1:+10,-5%
80%
CH1:+10,-5%
INPUT VOLTAGE RANGE
88~132VAC / 176~264VAC SELECTED BY SWITCH 47~63Hz; 240~370VDC
AC CURRENT
2.5A/115V 1.25A/230V
INRUSH CURRENT
COLD START 35A
LEAKAGE CURRENT
<3.5mA/240VAC
OVERLOAD PROTECTION
105%~135% TYPE:OUTPUT SHUTDOWN RESET:RECYCLE AC ON / OFF
OVER VOLTAGE PROTECTION
CH1:5.75~6.75V
OVER TEMP. PROTECTION
----------
TEMP. COEFFICIENT
±0.03% / ºC (0~50ºC)
SETUP, RISE, HOLD UP TIME
200ms, 50ms, 20ms
VIBRATION
10~500Hz, 2G 10min./1cycle, PERIOD FOR 60min. EACH AXES
WITHSTAND VOLTAGE
I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
ISOLATION RESISTANCE
I/P-O/P, I/P-FG, O/P-FG:500VDC / 100M Ohms
WORKING TEMP., HUMIDITY
-10ºC~+60ºC(REFER TO OUTPUT DERATING CURVE), 20%~90% RH
STORAGE TEMP., HUMIDITY
-20ºC~+85ºC, 10%~95% RH
DIMENSION
199*110*50mm CASE:906
WEIGHT
SAFETY STANDARDS
0.88Kgs
UL1950, TUV EN60950 APPROVED
EMC STANDARDS
CISPR22 (EN55022) CLASS B, IEC801-2,3,4, IEC555-2 VERIFICATION
NOTE :
1.ALL PARAMETERS ARE SPECIFIED AT 230VAC INPUT, RATED LOAD, 25ºC 70% RH. AMBIENT.
2.TOLERANCE: INCLUDE SET UP TOLERANCE, LINE REGULATION, LOAD REGULATION.
3.RIPPLE & NOISE ARE MEASURED AT 20MHz BY USING A 12" TWISTED PAIR TERMINATED WITH A 0.1uF & 47uF CAPACITOR.
4.LINE REGULATION IS MEASURED FROM LOW LINE TO HIGH LINE AT RATED LOAD.
5.LOAD REGULATION IS MEASURED FROM 20% TO 100% RATED LOAD, AND OTHER OUTPUT AT 60% RATED LOAD.
6.EACH OUTPUT PROVIDE UP TO MAXIMUM CURRENT, BUT TOTAL LOAD CAN NOT EXCEED MAX. OUTPUT POWER.
7.C2,3,11 MUST BE REMOVED.
JUN.11.98
V-INFINITY LLC, 9615 SW Allen Blvd., Suite 103, Beaverton, OR 97005
1-866-372-1258
www.v-infinity.com