F0505T-1W_10 Datasheet, PDF (3/3 Pages) Crystek Corporation – 1W, FIXED INPUT, ISOLATED & UNREGULATED DUAL/SINGLE OUTPUT DC-DC CONVERTER

OUTLINE DIMENSIONS & FOOTPRINT DETAILS
MECHANICAL DIMENSIONS
RECOMMENDED FOOTPRINT
6.50 [0.256]
0.25 [0.010]
(Side View)
6.25 [0.246]
0.60 [0.024]
15.24 [0.600]
12.70 [0.500]
2.54 [0.100]
12 11 10
87
7.50 [0.295]
(Top View)
12 3
56
11.20 [0.441]
A
8.50 [0.335]
A
1.35 [0.053]
0.25 [0.010]
5°max
Note:
Unit: mm[inch]
Pin section tolerances: 0.10mm[ 0.004inch]
General tolerances: 0.25mm[ 0.010inch]
TUBE OUTLINE DIMENSIONS
14.10 [0.555]
8.90 [0.350]
10.10 [0.398]
1.00 [0.039]
12 11 10
87
12 3
56
2.54 [0.100]
2.10 [0.083]
2.54 [0.100]
FOOTPRINT DETAILS
Pin
Single Dual
1
GND
GND
2
Vin
Vin
5
0V
0V
6
NC
-Vo
8
+Vo
+Vo
Others
NC
NC
NC:No Connection
REEL PACKING OUTLINE DIMENSIONS
Taping dimension:
∅1.50 [0.059]
2.00 [0.079]
1.75 [0.069]
11.50 [0.453]
0.50 [0.020]
6.50 [0.256]
0.60 [0.024]
7.40 [0.291]
14.10 [0.555]
4.30 [0.169]
11.60 [0.457]
Taping reel dimension:
16.00[0.630]
∅1.50 [0.059]
29.40 [1.157]
7.35 [0.289]
Note:
Unit: mm[inch]
General tolerances: 0.5mm[ 0.020inch]
L=540mm[21.260inch] Devices per tube quantity: 33pcs
L=220mm[8.661inch] Devices per tube quantity: 12pcs
∅100.00 [3.937]
∅13.00 [0.512]
Note:
∅21.50 [0.846]
Unit: mm[inch]
General tolerances: 0.5mm[ 0.020inch]
Devices per reel quantity: 500pcs
Note:
1. Operation under minimum load will not damage the converter; However, they may not meet all specification listed, and that will reduce the
life of product.
2. All specifications measured at Ta=25°C, humidity<75%, nominal input voltage and rated output load unless otherwise specified.
1. Only typical models listed, other models may be different, please contact our technical person for more details.
2. In this datasheet, all the test methods of indications are based on corporate standards.
The copyright and authority for the interpretation of the products are reserved by MORNSUN
Specifications subject to change without notice.
E_T-1W&F_T-1W B/0-2010 Page 3 of 3