F0505T-1W_10 Datasheet, PDF (1/3 Pages) Crystek Corporation – 1W, FIXED INPUT, ISOLATED & UNREGULATED DUAL/SINGLE OUTPUT DC-DC CONVERTER

E_T-1W & F_T-1W Series
1W, FIXED INPUT, ISOLATED & UNREGULATED
DUAL/SINGLE OUTPUT DC-DC CONVERTER
RoHS
FEATURES
● Small Footprint
● SMD Package Style
● 3kVDC Isolation
● Temperature Range: -40°C ~ +85°C
● No Heatsink Required
● Industry Standard Pinout
● Internal SMD construction
● No External Component Required
● RoHS Compliance
APPLICATIONS
The E_T-1W & F_T-1W series are specially
designed for applications where a group of polar
power supplies are isolated from the input power
supply in a distributed power supply system on a
circuit board. These products apply to:
1) Where the voltage of the input power supply is
fixed (voltage variation ≤ ±10%);
2) Where isolation is necessary between input
and output (isolation voltage ≤3000VDC);
3) Where the regulation of the output voltage and
the output ripple noise are not demanding.
Such as: purely digital circuits, ordinary low
frequency analog circuits, and IGBT power device
driving circuits.
MODEL SELECTION
F0505T-1W
Rated Power
Package Style
Output Voltage
Input Voltage
Product Series
PRODUCT PROGRAM
Part
Num ber
Input
Voltage (VDC)
Nominal Range
Output
Voltage ^{Current (mA)}
(VDC) _{Max. Min.}
F0303T-1W
3.3 304
30
F0305T-1W
5
200
20
3.3
3.0-3.6
E0305T-1W
±5 ±100 ±10
E0312T-1W
±12 ±42
±5
F0505T-1W
5
200
20
F0509T-1W
9
110
11
F0512T-1W
12
84
9
F0515T-1W
15
66
7
E0505T-1W
5
4.5-5.5
±5 ±100 ±10
E0509T-1W
±9
±55
±6
E0512T-1W
±12 ±42
±5
E0515T-1W
±15 ±33
±4
F1203T-1W
3.3 303
30
F1205T-1W
5
200
20
F1209T-1W
9
110
11
F1212T-1W
12
84
9
F1215T-1W
E1205T-1W
E1209T-1W
E1212T-1W
E1215T-1W
12
10.8-13.2 15
66
7
±5 ±100 ±10
±9 ±55
±6
±12 ±42
±5
±15 ±33
±4
F2405T-1W
5
200
20
F2412T-1W
12
84
9
F2415T-1W
15
66
7
F2424T-1W
E2405T-1W
E2412T-1W
E2424T-1W
24
21.6-26.4 24
42
5
±5 ±100 ±10
±12 ±42
±5
±24 ±21
±3
Efficiency
(%, Typ.)
Certificate
73
75
68
77
70
UL
76
UL
78
UL
79
UL
71
UL
77
UL
78
UL
79
UL
70
69
UL
73
UL
73
UL
74
UL
71
UL
73
UL
74
UL
75
UL
69
77
74
76
70
77
79
COMMON SPECIFICATIONS
Item
Test Conditions
Storage humidity
Min. Typ. Max.
95
Units
%
Operating temperature
-40
85
MORNSUN Science & Technology Co.,Ltd.
Address: No. 5, Kehui St. 1, Kehui development
center, Science Ave., Guangzhou Science City,
Luogang district, Guangzhou,P.R.China.
Tel: [phone]
Fax:[phone]
Http://www.mornsun-power.com
Storage temperature
Temp. rise at full load
-55
125
°C
15 25
Lead temperature
1.5mm from case for 10 seconds
260
Cooling
Free air convection
Package material
Epoxy Resin(UL94-V0)
Short circuit protection*
1
s
MTBF
3500
k hours
Weight
1.71
g
*Supply voltage must be discontinued at the end of short circuit duration.
The copyright and authority for the interpretation of the products are reserved by Mornsun
Specifications subject to change without notice.
E_T-1W&F_T-1W B/0-2010 Page 1 of 3