H16WD Datasheet, PDF (2/5 Pages) Crydom Inc., – H16WD Series

INPUT SPECIFICATIONS (1)
Description
Control Voltage Range
Must Turn-Off Voltage
Maximum Reverse Voltage
Minimum Input Current @ Minimum Voltage (for on-state)
Maximum Input Current @ Maximum Voltage
Nominal Input Impedance
Maximum Turn-On Time [msec] (5)
Maximum Turn-Off Time [msec]
Wire Size max (solid/stranded) [AWG/ IEC mm²]
LED Status Indicator (Color)
Input Terminal Screw Torque Range:
GENERAL SPECIFICATIONS
Description
Dielectric Strength, Input/Output/Base (50/60Hz)
Minimum Insulation Resistance (@ 500 V DC)
Maximum Capacitance, Input/Output
Ambient Operating Temperature Range
Ambient Storage Temperature Range
Weight (typical)
Housing Material
SSR Mounting Torque Range [in lbs/Nm]
Baseplate Material
RoHS Exemption #’s
GENERAL NOTES
GENERAL NOTES
1) All parameters at 40°C and per section unless otherwise specified.
2) Heat sinking required, see derating curves.
3) Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1
4) Input circuitry version incorporates active current limiter.
5) Turn-on time for DC control random turn-on versions is 0.02 msec
WIRING DIAGRAM
DC Control
4-32 VDC
1 .0 VDC
32 VDC
9mA
11mA
See Note 4
1/2 Cycle
1/2 Cycle
2 x 12 / 3.3
w/G Option (green)
8-10 in lb (0.9-1.1Nm)
Parameters
4000 Vrms
10¹⁰ Ohm
8 pF
-40 to 80 °C
-40 to 125 °C
3 oz (86.5 g)
Thermoplastic Polyester
18-20 (2-2.2)
Aluminum
5(a), 7(a), 7(c)-I