DC100D10C Datasheet, PDF (2/8 Pages) Crydom Inc., – Power Plus DC Series

GENERAL SPECIFICATIONS ⁽²⁾
Description
Dielectric Strength, Input/Output/Base (50/60Hz)
Minimum Insulation Resistance (@ 500 VDC)
Maximum Capacitance, Input/Output
Ambient Operating Temperature Range (7)
Ambient Storage Temperature Range
Weight (typical)
Housing Material
Hardware Finish
Baseplate Material
Input Terminal Screw Torque Range (in-lb/Nm)
Load Terminal Screw Torque Range (in-lb/Nm)
SSR Mounting Screw Torque Range (in-lb/Nm)
Input/Load Terminal Screw Torque Range (in-lb/Nm) (1)
Input/Output Terminal Screw Thread Size
Humidity per IEC60068-2-78
LED Input Status Indicator
MTBF (Mean Time Between Failures) at 40°C ambient temperature (8)
MTBF (Mean Time Between Failures) at 60°C ambient temperature (8)
WIRING DIAGRAM
* Inductive loads must be diode suppresed.
+
+
-
V
Load
*
* Load
V
-
+
+
1
OUTPUT
+2
SOLID STATE RELAY
4
INPUT
+3
1
OUTPUT
+2
SOLID STATE RELAY
4
INPUT
+3
+
+
V
V
-
-
EQUIVALENT CIRCUIT BLOCK DIAGRAMS
+DC 3
-DC 4
Current
Limiter
Control
Circuit
Trigger
Circuit
Datas^Pah^nele^Me^out^nt
Parameters
3750 Vrms
10⁹ Ohms
8 pF
-40 to 100 °C
-40 to 125 °C
2.53 oz (72 g)
UL94 V-0
Nickel Plating
Aluminum
13-15 /1.5-1.7
18-20 / 2-2.2
18-20 / 2-2.2
w/”K” option 8-10 / 0.9-1.13
#6-32 UNC / #8-32 UNC
85% non-condensing
Green
21,395,130 hours (2,441 years)
11,545,504 hours (1,317 years)
Terminals
Input
Output
Recommended Wire Sizes
Wire Size
(Solid / Stranded)
24 AWG (0.2 mm²) / 0.2 [minimum]
2 x 12 AWG (3.3 mm²) / 3.3 [maximum]
20 AWG (0.5 mm²) / 0.518 [minimum]
2 x 10 AWG (5.3 mm²) / 5.3
2 x 8 AWG (8.4 mm²) / 8.4 [maximum]
Wire Pull-Out
Strength (lb)[N]
10 [44.5]
90 [400]
30 [133]
110 [490]
90 [400]
2 +DC
1 -DC
Input Current vs Input Voltage
Standard Regulated DC Input
14
12
10
8
6
4
2
0
0
5
10
15
20
25
30
35
DC Input Voltage
Do not forget to visit us at: www.crydom.com
Copyright © 2016 Crydom Inc. Specifications subject to change without notice.