D53TP50D-10 Datasheet, PDF (2/6 Pages) Crydom Inc., – 53TP Series IP00

DataS^Pah^nee^{l M}e^out^nt
INPUT SPECIFICATIONS ⁽¹⁾
Description
Control Voltage Range
Minimum Turn-On Voltage
Minimum Turn-Off Voltage
Minimum Input Current (for on-state)
Maximum Input Current
Nominal Input Impedance
Maximum Turn-On Time [msec] (5)
Maximum Turn-Off Time [msec]
GENERAL SPECIFICATIONS ⁽¹⁾
Description
Dielectric Strength, Input/Output/Base (50/60Hz)
Minimum Insulation Resistance (@ 500 V DC)
Maximum Capacitance, Input/Output
Ambient Operating Temperature Range
Ambient Storage Temperature Range
Weight (typical)
Encapsulation
Terminals
Screws and Saddle clamps
Input Terminal Screw Torque Range:[in lbs/Nm]
Output Terminal Screw Torque Range:[in lbs/Nm]
GENERAL NOTES
1) All parameters at 25°C unless otherwise specified.
2) Relay will self trigger between 900-1200 Vpk.
3) Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1
4) Heat sinking required, see page 4 for derating curves.
5) Turn-on time for Random turn-on versions is 0.02 msec (DC Control Models)
D53
4-32 VDC
4.0 VDC
1.0 VDC
19 mA @ 4V
25 mA @ 32V
Current Limiter
1/2 Cycle
1/2 Cycle
A53
90-280 Vrms
90 Vrms
10 Vrms
2.2 mA @ 120V
10mA @ 240V
Current Limiter
50
50
Parameters
4000 Vrms
10⁹ Ohms
8 pF
-40ºC to 80ºC
-40ºC to 125ºC
10.3 oz (315g)
Thermally conductive Epoxy
Nickel plated Brass
Zinc plated Steel
8-10 / 0.9-1.1
15-20 / 1.7-2.2
Do not forget to visit us at: www.crydom.com
Copyright © 2017 Crydom Inc. Specifications subject to change without notice.