CMPA2560025F_15 Datasheet, PDF (6/11 Pages) Cree, Inc – 25 W, 2500 - 6000 MHz, GaN MMIC Power Amplifier

General Device Information
The CMPA2560025F is a two stage GaN HEMT MMIC Power Amplifier, which operates between 2.5- 6.0 GHz. The amplifier
typically provides 25 dB of small signal gain and 25 W saturated output power with an associated power added efficiency of better than
30 %. The wideband amplifier’s input and output are internally matched to 50 Ohm. The amplifier requires bias from dedicated ports.
The RF-input and output both require an external DC-block. DC voltage should not be applied to the RF output pin due to the internal
matching elements. The two gate pins, G1 and G2, are internally connected so it is sufficient to apply bias to only one of them. The drain
pins, D1 and D2, should both be connected to the drain supply. The component has internal DC-decoupling on the gate and drain pins,
1840pF and 920pF respectively. The test fixture also provides extra decoupling capacitors on all supply lines. Details of these compo-
nents can be found on the bill of materials.
The CMPA2560025F is provided in a lead-less package format. The input and output connections are gold plated to enable
gold bond wire attach at the next level assembly.
The measurements in this data sheet were taken on devices wire-bonded to the test fixture with 2 mil gold bond wires. All
losses associated with the test fixture are included in the measurements.
Electrostatic Discharge (ESD) Classifications
Parameter
Human Body Model
Charge Device Model
Symbol
HBM
CDM
Class
1A (> 250 V)
II (200 < 500 V)
Test Methodology
JEDEC JESD22 A114-D
JEDEC JESD22 C101-C
Copyright © 2008-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are
registered trademarks of Cree, Inc. Other trademarks, product and company names are the property of their respective owners and do not imply specific
product and/or vendor endorsement, sponsorship or association.
6
CMPA2560025F Rev 3.0
Cree, Inc.
4600 Silicon Drive
Durham, North Carolina, USA 27703
USA Tel: [phone]
Fax: [phone]
www.cree.com/rf