CMPA5585025F Datasheet, PDF (15/19 Pages) Cree, Inc – 25 W, 5.5 - 8.5 GHz, GaN MMIC, Power Amplifier

CMPA5585025F-AMP Demonstration Amplifier Circuit
To configure the CMPA5585025F test fixture to enable independent V_G1 / V_G2 control of the device, a cut
must be made to the microstrip line just above the R1 resistor as shown. Pin 9 will then supply V_G1 and Pin 8 will
supply V_G2.
Copyright © 2011-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are
registered trademarks of Cree, Inc. Other trademarks, product and company names are the property of their respective owners and do not imply specific
product and/or vendor endorsement, sponsorship or association.
15
CMPA5585025F Rev 4.1
Cree, Inc.
4600 Silicon Drive
Durham, North Carolina, USA 27703
USA Tel: [phone]
Fax: [phone]
www.cree.com/rf