TL602-024M Datasheet, PDF (2/3 Pages) Connor-Winfield Corporation – TCXO Specification Models TL602 and TVL602

2111 Comprehensive Drive
Aurora, Illinois 60505
Phone: [phone]
Fax: [phone]
www.conwin.com
TL602-020.0M Package Layout
TL602 Suggested Pad Layout
Pin 1
0.030
(0.762mm)
(4 Places)
0.038
(0.965mm)
(4 Places)
0.276 ±0.006
(7.0mm)
0.079 Max.
(2.0mm)
TL602 1438
0.197
±0.006
20.0 MHZ ^(5.0mm)
10
1
Temperature
260°C
220°C
180°C
150°C
120°C
260°C
0
10 s
Up to 120 s
Typical
60 to 90 s
Typical
Meets IPC/JEDEC J-STD-020C
2
0.025(6 Places)
(0.635mm)
3
4
0.040
(1.02mm)
(6 Places)
Bottom
View
0.100
(2.54mm)
9
5
876
Dimensional Tolerance:
0.100
±.005 (.127mm)
(2.54mm)
±.02 (.508mm)
0.037 ⁹
(0.94mm)
0.215
(5.46mm)
10
0.295
(7.49mm)
0.030
(0.76mm)
876
5
Top View
4
123
0.051
(1.28mm)
Keep Out Area
0.051
(1.28mm)
* Do not route any traces in the keep out area.
It is recommended the next layer under the
keep out area is to be ground plane.
Output Waveform
TL602-024.576M Package Layout
0.276 ±0.006
0.27(76.0±m0.m00)6
(7.0mm)
0.095
0.0(925.4mm)
(2.4mm)
TL602 Pad Connections
Pad Connection
1: Do Not Connect
2: Do Not Connect
3: Do Not Connect
4: Ground
5: Output
6: Do Not Connect
7: Do Not Connect
8: Tri-State Enable / Disable
9: Supply Voltage Vcc
10: N/C
Solder Profile
Temperature
260°C
220°C
180°C
150°C
120°C
260°C
T^TL^L6⁶0⁰2²14¹3⁴8³⁸
2²4⁴.5^.57⁷6⁶M^MH^Hz ^z
±00.^±.1⁰0^09.0^.17609076
(5.⁽0⁵m^.0m^m)^m)
TVL602-020.0M Package Layout
0.276 ±0.006
(7.0mm)
(Top View)
0.079 Max.
(2.0mm)
Pad 1
TVL602 1511
20.0 MHZ
0.197
±0.006
(5.0mm)
0.034
(0.90mm)
(4 Places)
1
2
(Bottom View)
4
3
Dimensional Tolerance:
±.005 (.127mm)
±.02 (.508mm)
0.055
(1.40mm)
(4 Places)
TVL602-024.576M Package Layout
0.276 ±0.006
(7.0mm)
0₀._.0₀9₉5₅
(2₂._.4₄m_mm_m)₎
1V/Div
0
10 s
Up to 120 s
Typical
60 to 90 s
Typical
Meets IPC/JEDEC J-STD-020C
TVL602 Suggested Pad Layout
0.071
(1.8mm)
4 Places
4
3
0.165
(4.2mm)
1
(Top View)
0.224
(5.7mm)
0.047
(1.2mm)
4 Places
Keep
Out *
2 Area
TVL602
Pad Connections
Pad Connection
1: N/C
2: Ground
3: Output
4: Supply Voltage Vcc
* Do not route any traces in the keep out area. It is
recommended the next layer under the keep out
area is to be ground plane.
T^TV^LL⁶6⁰0²2 ¹1⁴5³1⁸1
2₂4₄._.5₅7₇6_{6 M}M_HH_zz
0₀._.1₁9₉7₇
±_±0₀._.0₀0₀6₆
(₍5₅._.0₀m_mm_m)₎
Specifications subject to change without notification. See Connor-Winfield's website for latest revision. All dimensions in inches.
© Copyright 2015 The Connor-Winfield Corporation Not intended for life support applications.
Bulletin
Page
Revision
Date
Tx414
2 of 3
02
19 March 2015