SB520E-G Datasheet, PDF (1/3 Pages) Comchip Technology – ESD Leaded Schottky Barrier Rectifiers

ESD Leaded Schottky Barrier Rectifiers
SB520E-G Thru. SB5100E-G
Comchip
SMD Diode Specialist
Voltage: 20 to 100 V
Current: 5.0 A
RoHS Device
DO-201AD
Features
-Low drop down voltage.
-5.0A operation at TA=75°C with no thermal runaway.
-For use in low voltage, high frequency invertors free
wheeling and polarity protection.
-Silicon epitaxial planar chips.
-ESD test under IEC6100-4-2 :
Standard: >15KV(Air) & 8KV(Contact)
-Lead-free part, meet RoHS requirements.
0.210(5.3)
0.189(4.8)
1.0(25.4) Min.
0.375(9.5)
0.287(7.3)
Mechanical data
-Epoxy: UL94-V0 rated flame retardant
-Case: Molded plastic body DO-201AD
-Terminals: Solderable per MIL-STD-750 Method 2026
-Polarity: Color band denotes cathode end
-Mounting Position: Any
-Weight: 1.12grams
0.052(1.3)
0.048(1.2)
1.0(25.4) Min.
Dimensions in inches and (millimeter)
Electrical Characteristics (at TA=25°C unless otherwise noted)
Ratings at 25°C ambient temperature unless otherwise specified.
Parameter
Symbol
SB
520E-G
SB
540E-G
SB
545E-G
SB
550E-G
SB
560E-G
SB
SB
580E-G 5100E-G
Unit
Maximum recurrent peak reverse voltage
VRRM
20
40
45
50
60
80
100
V
Maximum RMS voltage
VRMS
14
28
30
35
42
56
70
V
Maximum DC blocking voltage
VDC
20
40
45
50
60
80
100
V
Maximum average forward rectified current
I(AV)
0.5” (12.7mm) lead length at TA=75°C, See Figure 1
5.0
A
Peak forward surge current
8.3ms single half sine-wave superimposed on rated load
(JEDEC method) TL=110°C
IFSM
150
125
A
Maximum forward voltage at 5.0A (Note 1)
VF
0.55
0.70
0.85
V
0.5
Maximum DC reverse current TA=25°C
At rated DC blocking voltage TA=100°C
IR
50
mA
30
Typical junction capacitance (Note 2)
CJ
500
pF
Typical thermal resistance (Note 3)
Operating junction temperature range
Storage temperature range
RθJA
RθJL
TJ
TSTG
-65 to +125
35.0
15.0
-65 to +150
-65 to +150
°C/W
°C
°C
NOTES:
1. Pulse test : 300µS pulse width, 1% duty cycle.
2. Measured at 1.0MHz and applied reverse voltage of 4.0 Volts.
3. Thermal resistance from junction to ambient and from junction to lead P.C.B. mounted 0.500” (12.7mm) lead length with 2.5x2.5” (63.5x63.5mm) copper
pad.
QW-BB043
Comchip Technology CO., LTD.
REV:A
Page 1