EV8000 Datasheet, PDF (6/35 Pages) CML Microcircuits – Evaluation Kit User

Evaluation Kit User Manual for FX828 and FX829
EV8000
1.3.2 Operation
This evaluation kit has no inherent functionality without the µC board and appropriate firmware
and PC software. The signalling processor board may be used independently of the µC board, if
the user wishes to interface to a different type of µC. The user will then have to supply his own
software.
The µC board is designed to control the operation of the signalling processor board. The
firmware which is pre-programmed into the PIC µC has both communications and application
specific functions. These functions are controlled from the PC software (ES8000) which runs in a
Windows environment.
Refer to Section 1.6.5 for the known software bugs and Section 1.6.6 for the troubleshooting
guide.
The PICPROGA.EXE program can be used to re-program the PIC µC firmware, if required.
© 2004 CML Microsystems Plc
6
UM8000/4