EV8000 Datasheet, PDF (18/35 Pages) CML Microcircuits – Evaluation Kit User

Evaluation Kit User Manual for FX828 and FX829
EV8000
1.6.3.7 Toolbar Buttons
An ES8000 toolbar, containing five buttons, has been provided to give quick access to menu
commands. The toolbar is optional and can be turned on or off from the View menu. The
appearance of the buttons and their command descriptions are as follows:
Button
Command Description
Initialises the Com link to the µC board
Notifies the software that the user will be resetting the µC board. It
generates a pop-up window, asking the user to push the µC board
reset switch. This pop-up disappears when the µC board reset
switch (SW1) is pushed.
Performs a General Reset on the current C-BUS. All EV8000
devices and ES8000 active device forms on this C-BUS will be
reset.
Opens the Add Device pop-up window.
Opens the About ES8000 pop-up window which displays program
information and version number.
1.6.3.8 Viewing the Toolbar and Status Bar
The Toolbar and Status Bar can be removed from or inserted into the main window by clicking on
the View menu and then clicking on the required command.
© 2004 CML Microsystems Plc
18
UM8000/4