EV9800 Datasheet, PDF (4/25 Pages) CML Microcircuits – Evaluation Kit

Evaluation Kit User Manual for CMX980A
EV9800
1.2 Preliminary Information
1.2.1 Laboratory Equipment
The following laboratory equipment is needed to use this evaluation kit:
1.2.1.1 Power Supplies
±15V Regulated laboratory power supplies are required.
If the user wishes to use the supplied software and firmware:
1.2.1.2 DSP development card, specifically the Texas Instruments DSKplus, target processor -
TMS320C542, TI part no. - TMDS32000L0. Documentation for this kit, and the target processor, is
available on TI’s website.
1.2.1.3 IBM compatible PC, 486DX2-66MHz with 8-bit bi-directional parallel port (EPP or ECP printer ports
must be set to standard mode) running Windows 3.1x or Windows 95.
1.2.2 Handling Precautions
Like most evaluation kits, this product is designed for use in office and laboratory environments. The
following practices will help ensure its proper operation.
1.2.2.1 Static Protection
This product uses low power CMOS circuits which can be damaged by electrostatic discharge.
Partially damaged circuits can function erroneously, leading to misleading results. Observe ESD
precautions at all times when handling this product.
1.2.2.2 Contents - Unpacking
Please ensure that you have received all of the items on the separate information sheet (EK9800) and
notify CML within 7 working days if the delivery is incomplete.
1.2.3 Approvals
There are no approvals for this product.
© 1999 Consumer Microcircuits Limited
4
UM9800/3