EV9800 Datasheet, PDF (23/25 Pages) CML Microcircuits – Evaluation Kit

Evaluation Kit User Manual for CMX980A
EV9800
1.7 Performance Specification
1.7.1 Electrical Performance
Absolute Maximum Ratings
Exceeding these maximum ratings can result in damage to the Evaluation Kit.
Supply
+15V
-15V
Voltage on any connector pin to VSS
Current into or out of +15V or -15V and VSS pins
Storage Temperature
Operating Temperature
Min.
-0.3
+0.3
-0.3
0
-10
+10
Max.
22.0
-22.0
VDD + 0.3
500
+70
+35
Units
V
V
mA
°C
°C
Operating Limits
Correct operation of the Evaluation Kit outside these limits is not implied.
Supply (15V - VSS)
(-15V - VSS)
Operating Temperature
Notes
Min.
14.5
-14.5
+10
Max.
15.5
-15.5
+35
Units
V
V
°C
Operating Characteristics
For the following conditions unless otherwise specified:
VDD = 5.0V, Tamb = +25°C.
DC Parameters
I_15V
I_-15V
Notes
1,2
Min.
Typ.
65
20
Max.
100
25
Units
mA
mA
Notes:
1. Not including any current drawn from the board connector pins by external circuitry.
2. Fitting a DSKplus and using the power rail provided on-board will increase the current
consumption by approximately 250mA.
Operating Characteristics - Timing Diagrams
For CMX980A timing information and operating characteristics, refer to the relevant CML Data Sheet.
© 1999 Consumer Microcircuits Limited
23
UM9800/3