DB1065 Datasheet, PDF (3/23 Pages) CML Microcircuits – CTCSS Encoder / Decoder Development Kit

9. Schematic __________________________________________________________ 20
10. Component layout___________________________________________________ 21
Table of Figures
FIGURE 1: TEST EQUIPMENT CONNECTIONS
7
FIGURE 2: COMPOSITE TEST SIGNAL CIRCUIT DIAGRAM
10
FIGURE 3: TESTING AT DIFFERENT SUPPLY VOLTAGES
11
FIGURE 4: SUPPLY VOLTAGE VS TYPICAL SUPPLY CURRENT
12
FIGURE 5: BREAKING OUT SMALL CIRCUIT
13
FIGURE 6: COMPARISON OF EXTERNAL COMPONENTS FOR OLDER CTCSS ICS
19
FIGURE 7: DB1065 SCHEMATIC
20
FIGURE 8: COMPONENT VIEW ASSEMBLY DRAWING
21
FIGURE 9: SOLDER VIEW ASSEMBLY DRAWING
22
1. General Information
1.1 Introduction
This manual provides general information to support the installation and operation of the DB1065
Development Kit, a complete test platform to demonstrate and test the MX465 CTCSS encoder/
decoder.
All trademarks and service marks are held by their respective owners.
1.2 Warranty
The DB1065 hardware has been developed and is provided to help designers develop designs
based on the MX465 CTCSS Encoder / Decoder IC. Every reasonable effort has been made to
provide high quality and performance in pursuit of that goal.
Toward that end, MX-COM, Inc. would value any suggestions to improve the DB1065’s manual
and suggestions concerning the DB1065’s hardware design.
Since experiments and designs are the responsibility of the DB1065 user, MX-COM, Inc.’s liability
regarding the use of the DB1065 is in all cases limited to the DB1065 purchase price.
No other warranty is expressed or implied.
20480150.001 MX-COM
1996
Page 3