EV6000 Datasheet, PDF (18/18 Pages) CML Microcircuits – CML Semiconductor Products

Evaluation Kit User Manual for PIC Board
EV6000
Notes:
1. Not including any current drawn from the board connector pins by external circuitry.
2. Timing for an external input to the OSC1 pin.
3. When µC pin is configured as an input.
4. When µC pin is configured as an output.
Operating Characteristics - Timing Diagrams
For µC timing information and operating characteristics, see manufacturer's literature (Arizona Microchip
Technology).
For FX602/FX604/FX614 timing information and operating characteristics, refer to CML Data Sheets.
CML does not assume any responsibility for the use of any circuitry described. No IPR or circuit patent
licences are implied. CML reserves the right at any time without notice to change the said circuitry and
this evaluation kit specification. Evaluation kits are supplied for the sole purpose of demonstrating the
operation of CML products and are supplied without warranty. They are intended for use in a
laboratory environment only and are not for re-sale, end-use or incorporation into other equipments.
Operation of evaluation kits outside a laboratory environment is not permitted within the European
Community. All software is supplied "as is" and is without warranty. It forms part of the evaluation kit
and is licensed for use only in this kit, for the purpose of demonstrating the operation of CML products.
Whilst all reasonable efforts are made to ensure that software contained in this product is virus free,
CML accepts no responsibility whatsoever for any contamination which results from using this software
and the onus for checking that the software is virus free is placed on the purchaser of this evaluation
kit.
CONSUMER MICROCIRCUITS LIMITED
1 WHEATON ROAD
WITHAM - ESSEX
CM8 3TD - ENGLAND
Telephone:
Telefax:
e-mail:
[phone]
[phone]
[e-mail]
http://www.cmlmicro.co.uk