CPC75282 Datasheet, PDF (6/19 Pages) Clare, Inc. – Line Card Access Switch

CPC75282
1.7.2 Ringing Return Switch, SW3
Parameter
Test Conditions
Symbol Minimum Typical Maximum
Unit
V_SW3 (differential) = T_LINE to T_RINGING
All-Off state.
+25° C,
V_SW (differential) = -320V to gnd
-
V_SW (differential) = +260V to -60V
Off-State
Leakage Current
+85° C,
V_SW (differential) = -330V to gnd
I_SW
-
-
1
μA
V_SW (differential) = +270V to -60V
-40° C,
V_SW (differential) = -310V to gnd
-
V_SW (differential) = +250V to -60V
I_SW(on) = ±0mA, ±10mA, +25°C
60
-
On Resistance
I_SW(on) = ±0mA, ±10mA, +85°C
R_ON
-
85
100
Ω
I_SW(on) = ±0mA, ±10mA, -40°C
45
-
Maximum Differential Voltage (V_max)
-
-
320
ON-State Voltage ^{1 Foldback Voltage Breakpoint 1 (V}1⁾
ΔV_ON
200
-
-
V
Foldback Voltage Breakpoint 2 (V₂)
V₁ + 0.5
-
-
V_SW (on) = ±10V, +25°C
-
135
DC current limit 1 (I_LIM1) V_SW (on) = ±10V, +85°C
V_SW (on) = ±10V, -40°C
70
85
-
I_SW
mA
-
210
DC current limit 2 (I_LIM2)
1
-
-
Dynamic current limit
(t = <0.5 μs)
Ringing switches on, all other switches
off. Apply ±1kV 10x1000 μs pulse with
appropriate protection in place.
I_SW
-
2.5
-
A
+25°C, OFF_x = 0,
V_SW (T_RINGING, T_LINE) = ±320V
-
Logic Input to Switch
Output Isolation
+85°C, OFF_x = 0,
V_SW (T_RINGING, T_LINE) = ±330V
I_SW
-
-
1
μA
-40°C, OFF_x = 0,
V_SW (T_RINGING, T_LINE) = ±310V
-
Transient Immunity ²
-
dV/dt
1500
2100
-
V/μs
1 _{This parameter is not tested in production. Choice of secondary protector should ensure this rating is not exceeded.}
2 _{Applied voltage is 100VP-P square wave at 100Hz.}
6
www.clare.com
R00D