LCA182 Datasheet, PDF (1/5 Pages) Clare, Inc. – Single Pole OptoMOS Relay

LCA182
Single Pole OptoMOS^® Relay
Load Voltage
Load Current
Max R_ON
Input Control Current
LCA182
350
120
35
0.25
Units
V
mA
Ω
mA
Features
• Lowest available input control current (0.25mA)
• Small 6 Pin DIP Package
• Low Drive Power Requirements (TTL/CMOS
Compatible)
• No Moving Parts
• High Reliability
• Arc-Free With No Snubbing Circuits
• 3750V_RMS Input/Output Isolation
• No EMI/RFI Generation
• Machine Insertable, Wave Solderable
• Surface Mount and Tape & Reel Versions Available
Applications
• Telecommunications
• Telecom Switching
• Tip/Ring Circuits
• Modem Switching (Laptop, Notebook, Pocket
Size)
• Hookswitch
• Dial Pulsing
• Ground Start
• Ringer Injection
• Instrumentation
• Multiplexers
• Data Acquisition
• Electronic Switching
• I/O Subsystems
• Meters (Watt-Hour, Water, Gas)
• Medical Equipment—Patient/Equipment Isolation
• Security
• Aerospace
• Industrial Controls
Description
The LCA182 is a 1-Form-A solid state relay which
uses optically coupled MOSFET technology to
provide 3750V_RMS of input to output isolation. It
features an extremely low input control current of
only 0.25mA, the lowest available in the Clare Solid
State Relay Family. The efficient MOSFET switches
and photovoltaic die use Clare’s patented OptoMOS
architecture. The optically-coupled input is controlled
by a highly efficient GaAIAs infrared LED. The
LCA182 can be used to replace mechanical relays
and offers the superior reliability associated with
semiconductor devices. Because they have no
moving parts, they offer faster, bounce-free switching
in a more compact surface mount or though hole
package.
Regulatory Information
• UL Recognized: E76270
• CSA Certified: LR43639-10
• Certified to:
• EN 60950
• EN 41003
Ordering Information
Part #
LCA182
LCA182S
LCA182STR
Description
6 Pin DIP (50/Tube)
6 Pin Surface Mount (50/Tube)
6 Pin Surface Mount (1000/Reel)
Pin Configuration
LCA182 Pinout
AC/DC Configuration
1
+ Control
2
— Control
3
NC
LCA182 Pinout
DC Only Configuration
6
Load
5
Do Not Use
4
Load
1
+ Control
2
— Control
3
NC
6
+ Load
5
— Load
4
Switching Characteristics of
Normally Open (Form A) Devices
DS-LCA182-R01.1
CONTROL
10ms
LOAD
+
90%
10%
+
10%+
T_ON
T_OFF
www.clare.com
1