8060 Datasheet, PDF (4/10 Pages) ITT Industries – Alternate Action and Momentary Pushbutton Switches

8060 Series
Alternate Action and Momentary Pushbutton Switches
CAP COLOR
PLUNGER
ACTUATOR OR PLUNGER
A
S PLUNGER WITH CAP P/N 7527
S1 PLUNGER WITH CAP P/N 7089
S2 PLUNGER WITH CAP P/N 8018
L PLUNGER WITH CAP P/N 8941
L1 PLUNGER WITH CAP P/N 8940
NOTE: When selecting plunger and cap option, bushing selection must also be made, see below.
BUSHING
H .300" HIGH THREADED, FLAT
H9 .300" HIGH UNTHREADED, FLAT
NONE
NO BUSHING CHOICE REQUIRED
(JXX ACTUATORS)
OPTION
CODE
2
1
3
4
5
9
CAP COLOR
BLACK
WHITE
RED
ORANGE
YELLOW
GRAY
Cap Finish: gloss. Cap supplied not installed.
Other colors available, consult Customer
Service Center.
Y3 7.6mm THREADED, KEYWAY
1/4±40 UNS-2A
H bushing standard with C, W, Z or Z3 terminations.
H9 bushing standard with A, A3, AV2, AV3, or
V3-V31 terminations.
Withstands 12 in./lbs. of torque with no distortion.
Withstands 12 in./lbs. of torque with no distortion.
NOTE: When selecting bushing option, plunger selection must also be made, see above. No bushing option choice required when any JXX actuator option is selected.
NOTE. Two mounting nuts, locking ring and lockwasher supplied standard with threaded bushings.
Optional mounting nut and locking ring styles and finishes available, see section “Technical Data and
Additional Hardware”.
A-55
Third Angle
Projection
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ck-components.com