CS8900A_07 Datasheet, PDF (82/138 Pages) Cirrus Logic – Crystal LAN ™ ISA Ethernet Controller

CS8900A
Crystal LAN™ Ethernet Controller
Register B, BufCFG
Bit Bit Name
Operation
7 RxDMAiE When set, there is an interrupt if
one or more frames are trans-
ferred via DMA.
A RxMissiE When set, there is an interrupt if a
frame is missed due to insufficient
receive buffer space.
B Rx128iE When set, there is an interrupt
after the first 128 bytes of receive
data have been buffered.
D MissOvfloiE When set, there is an interrupt if
the RxMISS counter overflows.
F RxDestiE When set, there is an interrupt
after the DA of an incoming frame
has been buffered.
Table 22. Registers 3 and B Interrupt Configuration
mine how frames will be transferred to host
memory, as described in Table 23.
Register 3, RxCFG
Bit
Bit Name
Operation
7
StreamE When set, Stream Transfer
enabled.
9
RxDMAonly When set, DMA slave opera-
tion used for all receive
frames.
A AutoRX DMAE When set, Auto-Switch DMA
enabled.
B
BufferCRC When set, the received CRC
is buffered.
Register 17, BusCTL
Bit
Bit Name
Operation
B
DMABurst When set, DMA operations
hold the bus for up to approx-
imately 28 µs. When clear,
DMA operations are continu-
ous.
D
RxDMAsize When set, DMA buffer size is
64 Kbytes. When clear, DMA
buffer size is 16 Kbytes.
Table 23. Receive Frame Pre-Processing
5.2.3 Receive Frame Pre-Processing
The CS8900A pre-processes all receive
frames using a four step process:
1) Destination Address filtering;
2) Early Interrupt Generation;
3) Acceptance filtering; and,
4) Normal Interrupt Generation.
Figure 21 provides a diagram of frame pre-
processing.
5.2.3.1 Destination Address Filtering
All incoming frames are passed through the
Destination Address filter (DA filter). If the
frame's DA passes the DA filter, the frame is
passed on for further pre-processing. If it fails
the DA filter, the frame is discarded. See
Section 5.2.10 on page 87 for a more detailed
description of DA filtering.
5.2.3.2 Early Interrupt Generation
The CS8900A support the following two early
interrupts that can be used to inform the host
that a frame is being received:
• RxDest: The RxDest bit (Register C, BufE-
vent, Bit F) is set as soon as the Destina-
tion Address (DA) of the incoming frame
passes the DA filter. If the RxDestiE bit
(Register B, BufCFG, bit F) is set, the
CS8900A generates a corresponding inter-
rupt. Once RxDest is set, the host is al-
lowed to read the incoming frame's DA (the
first 6 bytes of the frame).
• Rx128: The Rx128 bit (Register C, BufE-
vent, Bit B) is set as soon as the first 128
bytes of the incoming frame have been re-
ceived. If the Rx128iE bit (Register B,
BufCFG, bit B) is set, the CS8900A gener-
ates a corresponding interrupt. Once the
Rx128 bit is set, the RxDest bit is cleared
and the host is allowed to read the first 128
bytes of the incoming frame. The Rx128 bit
is cleared by the host reading the BufEvent
register (either directly or through the Inter-
rupt Status Queue) or by the CS8900A de-
CIRRUS LOGIC PRODUCT DATASHEET
82
DS271F4