CS4207 Datasheet, PDF (110/144 Pages) Cirrus Logic – Low-power, 4-in / 6-out HD Audio CODEC with Headphone Amp

CS4207
29:24
23:20
19:16
15:12
11:8
7:4
3:0
Read/Write
Read/Write
Read/Write
Read/Write
Read/Write
Read/Write
Read/Write
110111b
Dh
6h
0h
0h
3h
Eh
Location (LOC): This field indicates the physical
location of the device to which the pin complex is
connected. Set to internal + mobile lid inside.
Default Device (DD): Indicates the intended use
of the connection is for Digital In.
Connection Type (CTYP): Indicates the type of
physical connection is Other Digital.
Color (COL): This field indicates the color of the
physical jack for use by software. The color
selected is unknown.
Miscellaneous (MISC): No PDC override.
Default Association (DA): This field is used by
software to group Pin Complex (and therefore
jacks) together into functional blocks to support
multichannel operation. All jacks with the same
association number may be assumed to be
grouped together. A value of all ‘0’s is reserved.
A value of all ‘1’s in this field indicates that the
Association has the lowest priority.
Sequence (SEQ): This field indicates the order
of the jacks in the association group.
6.12.6 Digital Mic In 2 Configuration Default
The Configuration Default register is used by software as an aid in determining the configuration of jacks
and devices attached to the codec. At the time the codec is first powered on, this register is internally load-
ed with default values indicating the typical system use of this particular pin/jack. After this initial loading,
it is completely codec opaque, and its state, including any software writes into the register, must be pre-
served across reset events such as LINK Reset or Codec Reset (the Function Reset Verb). Its state need
not be preserved across power level changes.
Get Parameter Command Format:
Bits [31:28]
CAd = X
Bits [27:20]
Node ID = 12h
Bits [19:8]
Verb ID = F1Ch
Bits [7:0]
Parameter ID = 00h
Set Parameter Command Format:
Bits [31:28]
Bits [27:20]
CAd = X
Node ID = 12h
Bits [19:8]
Verb ID = 71Ch
Verb ID = 71Dh
Verb ID = 71Eh
Verb ID = 71Fh
Bits [7:0]
Parameter ID = xxh[7:0]
Parameter ID = xxh[15:8]
Parameter ID = xxh[23:16]
Parameter ID = xxh[31:24]
Response Format
Bits [31:0] are sticky and will not be reset by a Link Reset or a Codec Reset:
Bits
31:30
29:24
23:20
Type
Read/Write
Read/Write
Read/Write
Default
10b
110111b
Dh
Description
Port Connectivity (PCON): A fixed function
device is attached.
Location (LOC): This field indicates the physical
location of the device to which the pin complex is
connected. Set to internal + mobile lid inside.
Default Device (DD): Indicates the intended use
of the connection is for Digital In.
110
DS880F1