E20-00H Datasheet, PDF (3/3 Pages) Cherry Semiconductor Corporation – 5 current ratings

Dimensions — Double Pole inches (mm)
Actuators — Double Pole
Standard type integral hinged lever and
roller actuators are available in choice of
two mounting positions. Actuation lengths
are dimensioned from centerline of switch
mounting hole as shown.
Actuator Specifications — Double Pole
Series/
Prefix
Actuator Switch
Type
Type
Maximum Maximum
Operating Pretravel
Force
inches
(g)
(mm)
Operating
Point*
inches
(mm)
Each Pole
Minimum Max. Movement Actuation
Overtravel Differential Length
inches
inches
inches
(mm)
(mm)
(mm)
E19/G20
–00A
850
0.050 0.285±0.030 0.080
0.015
—
(1.27) (7.24±0.76) (2.03)
(0.38)
E20/E28
1280 0.100 0.248±0.030 0.050
0.015
—
(2.54) (6.30±0.76) (1.27)
(0.38)
E19/G20 –-00J
850
0.050 0.670±0.030 0.080
0.015
—
(1.27) (17.02±0.76) (2.03)
(0.38)
E20/E28^†
1280 0.100 0.630±0.030 0.050
0.015
—
(2.54) (16.00±0.76) (1.27)
(0.38)
E19/G20 –00M
850
0.050 0.812±0.030 0.218
0.015
—
(1.27) (20.62±0.76) (5.54)
(.038)
E20/E28^†
1280 0.100 0.774±0.030 0.188
0.015
—
(2.54) (19.66±0.76) (4.78)
(0.38)
E19/G20
–00H
205
0.275 0.312±0.062 0.187
(6.99) (7.92±1.57) (4.75)
0.093
(2.36)
1.500
(38.10)
E20/E28^†
425
0.330 0.468±0.062 0.156
(8.38) (11.89±1.57) (3.96)
0.050
(1.27)
0.821
(20.85)
E19/G20
–50H
130
0.400 0.281±0.062 0.187
(10.16) (7.14±1.57) (4.75)
0.140
(3.56)
1.750
(44.45)
E20/E28^†
285
0.600 0.437±0.062 0.156
(15.24) (11.10±1.57) (3.96)
0.080
(2.03)
1.071
(27.20)
E19/G20
–00K
212
0.250 0.718±0.062 0.187
(6.35) (18.24±1.57) (4.75)
0.093
(2.36)
1.391
(35.33)
E20/E28^†
425
0.348 0.860±0.062 0.156
(8.84) (21.84±1.57) (3.96)
0.045
(1.14)
0.688
(17.48)
E19/G20
–50K
150
0.312 0.687±0.062 0.187
(7.92) (17.45±1.57) (4.75)
0.140
(3.56)
1.625
(41.28)
E20/E28^†
312
0.525 0.828±0.062 0.146
(13.34) (21.03±1.57) (3.71)
0.075
(1.91)
0.943
(23.95)
* Measured above reference line. Refer to dimensional drawing above. **Actuator tolerance ±.0.031 inches (0.79mm).
†E20 and E28 actuators are shorter and formed up 15° at the button.
Contact factory for E25 specifications.
Ordering Information
Mounting — Double Pole
Select the current rating you need. Combine
the corresponding Series/Prefix number
with the appropriate suffix number for the
switch you need. Note: Consult factory for
part number when ordering E19A switches.
Recommended mounting screw: #6-32
round head. Recommended torque on
screw: 6 inch lbs. max. Recommended
maximum torque for ferrule: 20 inch pounds.
“J” & “M” Type
Optional Hardware — Double Pole
Brass Hex Nut
Brass Knurled Nut
Brass Hex Nut
(Nickel-Plated)
0012-0023
0012-0025
0012-0028
Brass Knurled Nut
(Nickel-Plated)
0012-0026
Star Washer (Lock Washer) 0012-0073
Circuitry — Double Pole
Contact arrangement available in choice of
single pole double throw or single pole sin-
gle throw, either normally open or normally
closed. In general, normally open may be
specified by changing suffix number from
00 to 01 and normally closed by changing
suffix number to 02.
Example: E19-00A is double throw,
E19-01A is normally open, and E19-02A
is normally closed.
Terminals — Double Pole
Standard 0.250″ x 0.032″ (6.35mm x 0.81mm)
[Optional 0.187″ x 0.032″ (4.75mm x 0.81mm)]
QC terminals can be furnished with angle
formed up or down on common as well as
open or closed terminal. Forms include
straight 30°, 45°, 85° up or down. Other
forms can be provided.
50
Specifications subject to change without notice.