E20-00H Datasheet, PDF (2/3 Pages) Cherry Semiconductor Corporation – 5 current ratings

Dimensions — Single Pole inches (mm)
Actuators — Single Pole
Standard type integral hinged lever and
roller actuators are available in choice of
two mounting positions. Actuation lengths
are dimensioned from centerline of switch
mounting hole as shown.
Actuator Specifications — Single Pole
Series/
Prefix
E13/G13
Actuator
Type
–00E
E14/E29/E30 –00A
Switch
Type
Maximum Maximum
Operating Pre-Travel
Force
inches
(g)
(mm)
Operating
Point*
inches
(mm)
Minimum Max. Movement Actuation
Over-Travel Differential Length**
inches
inches
inches
(mm)
(mm)
(mm)
425
0.050 0.285±0.020^ 0.100
0.015
—
(1.27) (7.24±0.51) (2.54)
(0.38)
850
0.100 0.248±0.026^ 0.050
0.015
—
(2.54) (6.30±0.66) (1.27)
(0.38)
E13/G13
–00J
425
0.050 0.670±0.030 0.108
0.015
—
(1.27) (17.02±0.76) (2.74)
(0.38)
E14/E29/E30
850
0.100 0.633±0.030 0.050
0.015
—
(2.54) (16.08±0.76) (1.27)
(0.38)
E13/G13
–00M
425
0.050 0.812±0.030 0.218
0.015
—
(1.27) (20.63±0.76) (5.54)
(0.38)
E14/E29/E30
850
0.100 0.775±0.030 0.168
0.015
—
(2.54) (19.69±0.76) (4.27)
(0.38)
E13/G13
–00H
E14/E29/E30^†
100
0.250 0.312±0.062 0.187
(6.35) (7.93±1.57) (4.75)
0.093
(2.36)
285
0.312 0.468±0.062 0.105 *** 0.050
(7.93) (11.89±1.57) (2.67)
(1.27)
1.500
(38.10)
0.821
(20.85)
E13/G13
–50H
E14/E29/E30^†
65
0.343 0.281±0.062 0.187
(8.71) (7.14±1.57) (4.75)
170
0.525 0.437±0.062 0.218
(13.34) (11.10±1.57) (5.54)
0.140
(3.56)
0.080
(2.03)
1.750
(44.45)
1.071
(27.20)
E13/G13
–00K
E14/E29/E30^†
100
0.250 0.718±0.062 0.187
(6.35) (18.24±1.57) (4.75)
285
0.348 0.860±0.062 0.130
(8.84) (21.84±1.57) (3.30)
0.093
(2.36)
0.045
(1.14)
1.391
(35.33)
0.688
(17.47)
E13/G13
–50K
63
0.403 0.687±0.062 0.187
(10.24) (17.45±1.57) (4.75)
0.093
(2.36)
E14/E29/E30^†
211
0.483 0.828±0.062 0.218
(12.27) (21.03±1.57) (5.54)
0.073
(1.85)
* Measured above reference line. Refer to dimensional drawing above. **Actuator tolerance ±0.031 inches (0.79mm).
†E14, E29 and E30 actuators are shorter and formed up 11° at the button.
*** E30 minimum over- travel is 0.150 (3.81).  G13 and E30 have operating point tolerances of ± 0.30.
1.625
(41.28)
0.943
(23.95)
Ordering Information
Select the current rating you need.
Combine the corresponding Series/Prefix
number with the appropriate suffix number
for the switch you need.
Mounting — Single Pole
Recommended mounting screw: #6-32
round head. Recommended torque on screw:
6 inch lbs. max. Recommended maximum
torque for ferrule: 20 inch pounds
“J” & “M” Type
Optional Hardware — Single Pole
Brass Hex Nut
Brass Knurled Nut
Brass Hex Nut
(Nickel-Plated)
0012-0023
0012-0025
0012-0028
Brass Knurled Nut
(Nickel-Plated)
0012-0026
Star Washer (Lockwasher)
0012-0073
Circuitry — Single Pole
Contact arrangement available in choice of
single pole double throw or single pole sin-
gle throw, either normally open or normally
closed. In general, normally open may be
specified by changing suffix number from
00 to 01 and normally closed by changing
suffix number to 02.
Example: E13-00E is double throw,
E13-01E is normally open, and E13-02E
is normally closed.
Terminals — Single Pole
Standard 0.250″ x 0.032″ (6.35mm x 0.81mm)
[Optional 0.187″ x 0.032″ (4.75mm x 0.81mm)]
QC terminals can be furnished with angle
formed up or down. Forms include straight
30°, 45°, 85° up or down. Other forms can
be provided.
Specifications subject to change without notice.
49