KTD251B335M90 Datasheet, PDF (2/3 Pages) United Chemi-Con, Inc. – DIPPED RADIAL LEAD MULTILAYER CERAMIC CAPACITORS

DIPPED RADIAL LEAD MULTILAYER CERAMIC CAPACITORS
/5%4FSJFT
˗SPECIFICATIONS
No.
Items
5 Rated Ripple Current
6 Robustness Tension
of
Terminations
Specification
Test Condition
Size code 32 43 55 76 80 90 99 10kHz to 1MHz (sine curve)
Arms 0.3 0.8 1.0 1.5 2.0 3.0 4.0 Ripple voltage Vp shall be less than the rated voltage.
No visible damage.
The force applied shall be :
Lead П (mm)
0.5 max.
0.6 min.
Tensile(N)
5
10
(sec.)
10ʶ1
10ʶ1
Bending
7 Vibration
8 Solderability
9 Resistance to Soldering Heat
10 Temperature Cycle
11 Humidity Load Life
12 Endurance
*CR : Rated Capacitance(µF)
Appearance : No abnormality.
Capacitance : To meet the initial
specification.
D.F. : To meet the initial specification.
Min. 75% of surface of the termination
shall be covered with new solder.
Appearance : No abnormality.
϶C/C :ʶ15%
D.F. : To meet the initial specification.
I.R. : To meet the initial specification.
Appearance : No abnormality.
϶C/C :ʶ15%
D.F. : To meet the initial specification.
I.R. : To meet the initial specification.
Appearance : No abnormality.
϶C/C :ʶ20%
D.F. : 10% maximum
I.R. : 25/CR(MЊ) or 1000(MЊ)
whichever is less.
Appearance : No abnormality.
϶C/C :ʶ20%
D.F. : 10% maximum
I.R. : 50/CR(MЊ) or 1000(MЊ)
whichever is less.
Lead П (mm)
0.5 max.
0.6 min.
Time : 2times.
Bending(N)
2.5
5
(kg)
0.25
0.51
Amplitude
: 1.5mm
Frequency range : 10-55-10Hz (1 min)
Direction and time :
2 hours each to X, Y, Z axis. Total 6 hours.
Solder
Solder Temperature
Dipping Time
Pb Free
245ʶ5ˆ
2ʶ0.5sec.
Solder Temperature : 350ʶ10ˆ
Dipping Time
: 3ʶ0.5 sec.
Depth
: 1.5 to 2mm
Step
Temperature (ˆ)
1
Min. Category temperature ʶ3
2
Room temperature
3 Max. Category temperature ʶ3
4
Room temperature
For 5 cycles for above temperature cycle.
Temperature : 40ʶ2ˆ
Humidity : 90 to 95%RH
Voltage
: Rated voltage
Time
:
500ʶ
24
0
hours
(min.)
30ʶ3
3 max.
30ʶ3
3 max.
Temperature : 125ʶ3ˆ
Voltage
: Rated voltage
Time
: 1000ʶ ⁴⁰⁸ hours
˗PART NUMBERING SYSTEM
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
K TD 5 0 0 B 1 0 6 M 5 5 A0 T 0 0
Supplement code
Taping code
Terminal code
Size code
Capacitance tolerance code
Nominal Capacitance code
Temperature characteristics code
Rated voltage code
Series code
Category
˗DIMENSIONS
Crimped lead
32 to 76 Size
L
T
Straight lead
For all size
L
T
F
d
F
d
Please refer to"Part Numbering System" of the beginning of a catalog for the details.
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
24
CAT. No. E1002V