KTD251B335M90 Datasheet, PDF (1/3 Pages) United Chemi-Con, Inc. – DIPPED RADIAL LEAD MULTILAYER CERAMIC CAPACITORS

DIPPED RADIAL LEAD MULTILAYER CERAMIC CAPACITORS
/5%4FSJFT
RoHS
Compliant
˗FEATURES
1. Small in size and wide capacitance range.
Max. 470ŸF is available.
2. Temperature characteristic is X7R in EIA code.
3. Superior humidity characteristic and long life.
4. Excellent high frequency characteristic due to low ESR.
5. High rated ripple current.
6. 250Vdc items are available.
7. Resin(UL94 V-0) used for coating.
8. Pb-free design(also ceramic dielectric)
˗APPLICATIONS
1. Smoothing circuit of switching mode AC-DC or DC-DC converter.
2. Noise suppressor for various kinds of equipments.
3. By-pass or decoupling circuits.
4. Automotive equipments.
˗CONSTRUCTION
Coating Resin
CDeierlaemctircic
Termination
˗RATINGS
1. Category Temperature Range
2. Rated Voltage Range
3. Rated Capacitance Range
4. Rated Capacitance Tolerance
5. Temperature Characteristics
6. Rated Ripple Current
Solder (Pb-free)
Internal Electrode
Lead Wire
-55 to +125ˆ
25, 50, 100, 250 Vdc
0.1 to 470ŸF
M(ʶ20%)
X7R
See No.5 on the following table
˗SPECIFICATIONS
No.
Items
1 Withstand
Voltage
Between
Terminals
Terminals to
Coating Resin
2 Insulation Resistance
3 Rated Capacitance
Specification
No abnormality.
100/CR(MЊ) or 4000(MЊ)
whichever is less.
Within specified tolerance.
4 Dissipation Factor
5.0% maximum.
Test Condition
250% of rated voltage shall be applied for 5 seconds.
(Only 250Vdc products : 475V)
Rated voltage shall be applied for 60ʶ5 seconds at
temperature 25ʶ2ˆ.
Temperature
Frequency
Voltage
CRʽ10ŸF
CR>10ŸF
25ʶ2ˆ
1ʶ0.1kHz
120ʶ12Hz
1ʶ0.2Vrms
0.5ʶ0.2Vrms
As customer requirement, Chemi-Con has submits the test results according to AEC-Q200 for Multilayer ceramic
capacitors. Please contact us for more information.
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
23
CAT. No. E1002V