THC63LVD1027_15 Datasheet, PDF (4/24 Pages) California Eastern Labs – Dual Link LVDS Repeater

THC63LVD1027_Rev.4.00_E
Pin Description
Pin Name
RA1+/-
RB1+/-
RC1+/-
RD1+/-
RE1+/-
RCLK1+/-
RA2+/-
RB2+/-
RC2+/-
RD2+/-
RE2+/-
RCLK2+/-
TA1+/-
TB1+/-
TC1+/-
TD1+/-
TE1+/-
TCLK1+/-
TA2+/-
TB2+/-
TC2+/-
TD2+/-
TE2+/-
TCLK2+/-
PD
RS
MODE1
MODE0
VDD
GND
CAP
Direction
Input
Output
Input
Power
Table 1. Pin Description
Type
LVDS
LV-TTL
-
Description
LVDS data input for channel A of 1st Link
LVDS data input for channel B of 1st Link
LVDS data input for channel C of 1st Link
LVDS data input for channel D of 1st Link
LVDS data input for channel E of 1st Link
LVDS clock input for 1st Link
LVDS data input for channel A of 2nd Link
LVDS data input for channel B of 2nd Link
LVDS data input for channel C of 2nd Link
LVDS data input for channel D of 2nd Link
LVDS data input for channel E of 2nd Link
LVDS clock input for 2nd Link
In Distribution and Single-in/Dual-out mode,RCLK2+/- must be Hi-Z.
(See “Mode selection” below in this page.)
LVDS data output for channel A of 1st Link
LVDS data output for channel B of 1st Link
LVDS data output for channel C of 1st Link
LVDS data output for channel D of 1st Link
LVDS data output for channel E of 1st Link
LVDS clock output for 1st Link
LVDS data output for channel A of 2nd Link
LVDS data output for channel B of 2nd Link
LVDS data output for channel C of 2nd Link
LVDS data output for channel D of 2nd Link
LVDS data output for channel E of 2nd Link
LVDS clock output for 2nd Link
Power Down
H: Normal operation
L: Power down state, all LVDS output signals turn to Hi-Z
LVDS output swing level selection
H: Normal swing
L: Reduced swing
Mode selection
MODE1 MODE0 RCLK2+/-
Description
L
L
Clkin
Dual-in/Dual-out mode
L
L
Hi-Z
Distribution mode
H
L
Hi-Z
Single-in/Dual-out mode
L
H
Clkin
Dual-in/Single-out mode
H
H
-
Reserved
In Distribution and Single-in/Dual-out mode, RCLK2+/- must be Hi-Z.
3.3V power supply pins
Ground pins (Exposed PAD is also Ground)
Decoupling capacitor pins
These pins should be connected to external decoupling capacitors(Ccap).
Recommended Ccap is 0.1F + 0.01F.
Copyright©2015 THine Electronics, Inc.
3
THine Electronics, Inc.
Security E