UPG2158T5K_0512 Datasheet, PDF (1/11 Pages) California Eastern Labs – L, S-BAND SPDT SWITCH

GaAs INTEGRATED CIRCUIT
µPG2158T5K
L, S-BAND SPDT SWITCH
DESCRIPTION
The µPG2158T5K is a GaAs MMIC for L, S-band SPDT (Single Pole Double Throw) switch which was developed
for mobile phone and another L, S-band application.
This device can operate 2 control switching by control voltage 1.8 to 5.3 V. This device can operate frequency from
0.05 to 3.0 GHz, having the low insertion loss and high isolation.
This device is housed in a 6-pin plastic TSSON (Thin Shrink Small Out-line Non-leaded) package. And this
package is able to high-density surface mounting.
FEATURES
• Switch control voltage
: Vcont (H) = 1.8 to 5.3 V (2.7 V TYP.)
: Vcont (L) = −0.2 to +0.2 V (0 V TYP.)
• Low insertion loss
: LINS1 = 0.40 dB TYP. @ f = 0.05 to 1.0 GHz, Vcont (H) = 2.7 V, Vcont (L) = 0 V
: LINS2 = 0.45 dB TYP. @ f = 1.0 to 2.0 GHz, Vcont (H) = 2.7 V, Vcont (L) = 0 V
: LINS3 = 0.47 dB TYP. @ f = 2.0 to 2.5 GHz, Vcont (H) = 2.7 V, Vcont (L) = 0 V
: LINS4 = 0.53 dB TYP. @ f = 2.5 to 3.0 GHz, Vcont (H) = 2.7 V, Vcont (L) = 0 V
• High isolation
: ISL1 = 27 dB TYP. @ f = 0.05 to 1.0 GHz, Vcont (H) = 2.7 V, Vcont (L) = 0 V
: ISL2 = 19 dB TYP. @ f = 1.0 to 2.0 GHz, Vcont (H) = 2.7 V, Vcont (L) = 0 V
: ISL3 = 17 dB TYP. @ f = 2.0 to 2.5 GHz, Vcont (H) = 2.7 V, Vcont (L) = 0 V
: ISL4 = 17 dB TYP. @ f = 2.5 to 3.0 GHz, Vcont (H) = 2.7 V, Vcont (L) = 0 V
• Handling power
: Pin (0.1 dB) = +29.0 dBm TYP. @ f = 2.0/2.5 GHz, Vcont (H) = 2.7 V, Vcont (L) = 0 V
: Pin (1 dB) = +30.5 dBm TYP. @ f = 2.0/2.5 GHz, Vcont (H) = 2.7 V, Vcont (L) = 0 V
• High-density surface mounting : 6-pin plastic TSSON package (1.0 × 1.0 × 0.37 mm)
APPLICATIONS
• L, S-band digital cellular or cordless telephone
• W-LAN, WLL and Bluetooth^TM etc.
ORDERING INFORMATION
Part Number
µPG2158T5K-E2
Order Number
Package
µPG2158T5K-E2-A 6-pin plastic TSSON
(Pb-Free) ^Note
Marking
Supplying Form
G2 • Embossed tape 8 mm wide
• Pin 1, 6 face the perforation side of the tape
• Qty 5 kpcs/reel
Note With regards to terminal solder (the solder contains lead) plated products (conventionally plated), contact
your nearby sales office.
Remark To order evaluation samples, contact your nearby sales office.
Part number for sample order: µPG2158T5K-A
Caution Observe precautions when handling because these devices are sensitive to electrostatic discharge.
Document No. PG10578EJ02V0DS (2nd edition)
Date Published December 2005 CP(K)
The mark  shows major revised points.