CAT34WC02 Datasheet, PDF (3/10 Pages) Catalyst Semiconductor – 2K-Bit I2C Serial EEPROM, Serial Presence Detect

CAT34WC02
A.C. CHARACTERISTICS
V_CC = +1.8V to +6.0V, unless otherwise specified.
Read & Write Cycle Limits
Symbol
Parameter
F_SCL
T_I(1)
t_AA
t_BUF(1)
t_HD:STA
t_LOW
t_HIGH
t_SU:STA
t_HD:DAT
t_SU:DAT
t_R(1)
t_F(1)
t_SU:STO
t_DH
Clock Frequency
Noise Suppression Time
Constant at SCL, SDA Inputs
SCL Low to SDA Data Out
and ACK Out
Time the Bus Must be Free Before
a New Transmission Can Start
Start Condition Hold Time
Clock Low Period
Clock High Period
Start Condition Setup Time
(for a Repeated Start Condition)
Data In Hold Time
Data In Setup Time
SDA and SCL Rise Time
SDA and SCL Fall Time
Stop Condition Setup Time
Data Out Hold Time
1.8V, 2.5V
Min. Max.
100
200
3.5
4.7
4
4.7
4
4.7
0
50
1
300
4
100
4.5V-5.5V
Min.
Max.
400
200
1
1.2
0.6
1.2
0.6
0.6
0
50
0.3
300
0.6
100
Units
kHz
ns
µs
µs
µs
µs
µs
µs
ns
ns
µs
ns
µs
ns
Power-Up Timing⁽¹⁾⁽²⁾
Symbol
tPUR
tPUW
Parameter
Power-up to Read Operation
Power-up to Write Operation
Max.
1
1
Units
ms
ms
Write Cycle Limits
Symbol
Parameter
tWR
Write Cycle Time
Min.
Typ.
Max
4
10
Units
ms
The write cycle time is the time from a valid stop
condition of a write sequence to the end of the internal
program/erase cycle. During the write cycle, the bus
interface circuits are disabled, SDA is allowed to remain
high, and the device does not respond to its slave
address.
Note:
(1) This parameter is tested initially and after a design or process change that affects the parameter.
(2) t_PUR and t_PUW are the delays required from the time V_CC is stable until the specified operation can be initiated.
3
Doc No. 1003, Rev. A