English
Language : 

PACS1284-06 Datasheet, PDF (2/5 Pages) California Micro Devices Corp – P/ACTIVE IEEE 1284 ECP/EPP TERMINATION NETWORK
CALIFORNIA MICRO DEVICES
PACS1284-06
STANDARD SPECIFICATIONS
Absolute Tolerance (R)
±10%
Absolute Tolerance (C)
±20%
Operating Temperature Range 0°C to 70°C
VCC
Power Rating/Resistor
6V Max
100mW
Maximum Leakage Current
(@VCC Max)
Signal Clamp Voltage:
Positive Clamp
Negative Clamp
1µA @ 25°C
>6V
<–6V
Storage Temperature
–65°C to 150°C
Package Power Range
1.00W Max
R1(Ω)
1K
STANDARD VALUES
R1(Ω)
R1(Ω)
39
5.1K
R1(Ω)
150pF
ESD SPECIFICATIONS
ESD Protection*
Peak Discharg Voltage at nay I/O, Human Body Model, Method 3015 (Note 1)
InSystem Protection, HBM (Note 2)
InSystem Protection, IEC 1000-4-2, Level 2 (Note 2,3)
Channel Clamp Voltage @ 8KV ESD Pulses, HBM (Note 1,2)
* Guaranteed by design
MIN
–4KV
–8KV
–4KV
–30KV
Note 1: Human Body Model per MIL-STD-883, Method 3015
CDischarge = 100pF, RDischarge = 1.5 KΩ, pin 20 @ 5V and pin 22 @ ground.
Note 2: Pin 22 grounded, pin 20 to VCC, all other pins are open. ESD contact discharge between ground and
pins 1, 2, 8, 10, 12, 15, 16, 17, 18, 19, 21, 23 through 28, one at a time.
Note 3: Standard IEC 1000-4-2 with CDischarge = 150pF, RDischarge = 330Ω, pin 20 @ 5V and pin 22 @ ground.
MAX
4KV
8KV
4KV
30KV
©2000 California Micro Devices Corp. All rights reserved.
2
215 Topaz Street, Milpitas, California 95035
Tel: (408) 263-3214
Fax: (408) 263-7846
www.calmicro.com 8/25/2000