|
CM1410 Datasheet, PDF (1/7 Pages) California Micro Devices Corp – 4 Channel Headset EMI Filter with ESD Protection | |||
|
CM1410
4 Channel Headset EMI Filter with ESD Protection
Features
⢠Functionally and pin compatible with CSPEMI200A
device
⢠Pi-style EMI filters in a capacitor-resistor-capacitor
(C-R-C) network
⢠Four channels of EMI filtering with ESD protection
⢠Includes 1 channel of ESD-only protection
⢠Greater than 30dB attenuation at 1GHz
⢠+8kV ESD protection on each channel
(IEC 61000-4-2 Level 4, contact discharge)
⢠+15kV ESD protection on each channel (HBM)
⢠Supports bipolar signalsâideal for
audio applications
⢠Chip Scale Package features extremely low
lead inductance for optimum filter and ESD
performance
⢠11-bump, 2.046mm X 1.436mm footprint
Chip Scale Package (CSP)
⢠Optiguard⢠coated for improved reliability at
assembly
⢠Lead-free version available
Applications
⢠EMI filtering and ESD protection for audio ports
⢠Wireless Handsets
⢠Handheld PCs / PDAs
⢠MP3 Players
⢠Digital Camcorders
⢠Notebooks
⢠Desktop PCs
Product Description
The CM1410 is a quad low-pass filter array integrating
four pi-style filters (C-R-C) that reduce EMI/RFI emis-
sions while at the same time providing ESD protection.
This device is custom-designed to interface with the
headset port on a cellular telephone, and contains 3
different filter values. Each high quality filter provides
more than 20dB attenuation in the 800-2700 MHz
range. These pi-style filters support bidirectional filter-
ing, controlling EMI both to and from the microphone
and speaker elements. They also support bipolar sig-
nals, enabling audio signals to pass through without
distortion.
In addition, the CM1410 provides a very high level of
protection for sensitive electronic components that may
be subject to electrostatic discharge (ESD). The
CM1410 can safely dissipate ESD strikes of +8kV, the
maximum requirement of the IEC 61000-4-2 interna-
tional standard. Using the MIL-STD-883 (Method 3015)
specification for Human Body Model (HBM) ESD, the
device provides protection for contact discharges to
greater than +15kV. The CM1410 also includes a sin-
gle channel of ESD-only protection.
The CM1410 is particularly well suited for portable
electronics (e.g., cellular telephones, PDAs, notebook
computers) because of its small package format and
low weight.
The CM1410 incorporates Optiguard⢠coating which
results in improved reliability at assembly.The CM1410
is available in a space-saving, low-profile Chip Scale
Package with optional lead-free finishing.
Electrical Schematic
MIC_IN1 B1
100Ω
C1 MIC_OUT1
10Ω
SPKR_IN1 C3
A3 SPKR_OUT1
MIC_IN2 A2
68Ω
C2 MIC_OUT2
10Ω
SPKR_IN2 C4
A4 SPKR_OUT2
GND B3
GND B4
B2
ESD1
© 2005 California Micro Devices Corp. All rights reserved.
09/15/05 490 N. McCarthy Blvd., Milpitas, CA 95035-5112 â² Tel: 408.263.3214 â² Fax: 408.263.7846 â² www.calmicro.com
1
|
▷ |