CS42432 Datasheet, PDF (40/62 Pages) Cirrus Logic – 108 dB, 192 kHz 4-in, 6-out TDM CODEC

7 REGISTER DESCRIPTION
All registers are read/write except for the I.D. and Revision Register and Interrupt Status Register which
are read only. See the following bit definition tables for bit assignment information. The default state of
each bit after a power-up sequence or reset is listed in each bit description.
7.1 MEMORY ADDRESS POINTER (MAP)
Not a register
7
INCR
6
MAP6
5
MAP5
4
MAP4
3
MAP3
2
MAP2
1
MAP1
0
MAP0
7.1.1 INCREMENT(INCR)
Default = 1
Function:
Memory address pointer auto increment control
0 - MAP is not incremented automatically.
1 - Internal MAP is automatically incremented after each read or write.
7.1.2 MEMORY ADDRESS POINTER (MAP[6:0])
Default = 0000001
Function:
Memory address pointer (MAP). Sets the register address that will be read or written by the control
port.
7.2 CHIP I.D. AND REVISION REGISTER (ADDRESS 01H) (READ ONLY)
7
Chip_ID3
6
Chip_ID2
5
Chip_ID1
4
Chip_ID0
3
Rev_ID3
2
Rev_ID2
1
Rev_ID1
7.2.1 CHIP I.D. (CHIP_ID[3:0])
Default = 0000
Function:
I.D. code for the CS42432. Permanently set to 0000.
7.2.2 CHIP REVISION (REV_ID[3:0])
Default = 0001
Function:
CS42432 revision level. Revision A is coded as 0001.
0
Rev_ID0
40
DS673PP2