SRC4392 Datasheet, PDF (3/79 Pages) Burr-Brown (TI) – Two-Channel, Asynchronous Sample Rate Converter with Integrated Digital Audio Interface Receiver and Transmitter

SRC4392
www.ti.com
SBFS029B – DECEMBER 2005 – REVISED APRIL 2006
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be
more susceptible to damage because very small parametric changes could cause the device not to meet its published
specifications.
ORDERING INFORMATION⁽¹⁾
PRODUCT
SRC4392
PACKAGE
TQFP-48
PACKAGE
DESIGNATOR
SPECIFIED
TEMPERATURE
RANGE
PFB
–40°C to +85°C
PACKAGE
MARKING
SRC4392I
ORDERING
NUMBER
SRC4392IPFBT
SRC4392IPFBR
TRANSPORT MEDIA,
QUANTITY
Tape and Reel, 250
Tape and Reel, 2000
(1) For the most current package and ordering information see the Package Option Addendum at the end of this document, or see the TI
web site at www.ti.com.
ABSOLUTE MAXIMUM RATINGS⁽¹⁾
Power Supplies
VDD18
VDD33
VIO
VCC
Digital Input Voltage: Digital Logic
RXCKI, MUTE, CPM, CS, CCLK, CDIN, CDOUT, INT, RST, MCLK, BLS, SYNC, BCKA,
BCKB, LRCKA, LRCKB, SDINA, SDINB
Line Receiver Input Voltage (per pin)
RX1+, RX1–, RX2+, RX2–, RX3+, RX3–, RX4+, RX4–
Input Current (all pins except power and ground)
Ambient Operating Temperature
Storage Temperature
–0.3V to +2.0V
–0.3V to +4.0V
–0.3V to +4.0V
–0.3V to +4.0V
–0.3V to (VIO + 0.3V)
(VDD33 + 0.3) V_PP
±10mA
–40°C to +85°C
–65°C to +150°C
(1) These limits are stress ratings only. Stresses beyond these limits may result in permanent damage. Extended exposure to absolute
maximum ratings may degrade device reliability. Normal operation or performance at or beyond these limits is not specified or ensured.
Submit Documentation Feedback
3