HB50-12 Datasheet, PDF (1/8 Pages) Broadband TelCom Power, Inc. – 12Vin 2.5, 3.3, 5.0, 12, 15, 24Vout 50W

BTCPower TM Broadband TelCom Power, Inc.
Redefining “Current” Limits In Power Conversion
Technical Specification
HB50-12 Series
12Vin 2.5, 3.3, 5.0, 12, 15, 24Vout 50W
Description
The HB50-12 Series of low cost half brick DC/DC
converters are comparable to existing half-bricks. They
are targeted specifically at the telecommunication,
industrial electronics, mobile telecommunication and
distributed power markets. With a wide input voltage
range of 9-18V they are available with output voltage
of either 2.5, 3.3, 5, 12, 15 or 24 Volts. All models
feature an input filter, input undervoltage lockout,
output overvoltage and overtemperature protection,
output current limiting and short circuit protection. The
unique open-frame construction with aluminum heat
spreader design achieves efficient heat transfer with
no hot spots.
Applications
• Telecommunications
• Data Communications
• Wireless Communications
• Networking Gear
• Servers, Switches and Data Storage
• Semiconductor Test Equipment
• Distributed Power Architecture
Features
• Delivers up to 50 W in half brick
• No minimum load required
• Low profile of only 0.50 inch
• 2.5V, 3.3V, 5V, 12V, 15V or 24V output
models
• Input operating range 9-18V
• -40°C to +100°C ambient operation
• On/Off pin and remote sense
• Output adjustment +10% and –10% range
• 1500V, 10M input-to-output isolation
• Meets Basic Insulation requirements of
EN60950
• UL 1950 recognized, TUV EN60950 and CSA
C22.2 No. 60950-00 Certified (pending)
• Meets conducted limits of FCC Class B and
CEI IEC61204-3 Class B with external filter
• MTBF of 1,000,000 hours @ 50°C
(Bellcore)
Broadband TelCom Power, Inc. 1719 S. Grand Avenue, Santa Ana, CA 92705 U.S.A.
Tel.: [phone] • Fax: [phone] • www.btcpower.com • Email: [e-mail] • PS HB50-12 Rev2 16-1-04