BBS-1080S Datasheet, PDF (6/88 Pages) BOSER Technology Co., Ltd – 19” 1U Height Half-size Bare Bone System with Pentium 4 Embedded Engine Board & 180W P4 ATX P/S

SSaaffeettyy IInnssttrruuccttiioonnss
Before getting started, read the following important cautions.
1. The BBS-1080S does not come equipped with an operating
system. An operating system must be loaded first before installing
any software into the computer.
2. Be sure to ground yourself to prevent static charge when installing
the internal components. Use a grounding wrist strap and place all
electronic components in any static-shielded devices. Most
electronic components are sensitive to static electrical charge.
3. Disconnect the power core from the BBS-1080S before making any
installation. Be sure both the system and the external devices are
turned OFF. Sudden surge of power could ruin sensitive
components. Make sure the BBS-1080S is properly grounded.
4. The brightness of the flat panel display decreases with usage.
However, hours of use vary depending on the application
environment.
5. The flat panel display is not susceptible to shock or vibration. When
assembling the BBS-1080S, make sure it is securely installed.
6. Do not open the system’s back cover. If opening the cover for
maintenance is a must, only a trained technician is allowed to do
so. Integrated circuits on computer boards are sensitive to static
electricity. To avoid damaging chips from electrostatic discharge,
observe the following precautions:
Before handling a board or integrated circuit, touch an unpainted
portion of the system unit chassis for a few seconds. This will help
to discharge any static electricity on your body.
When handling boards and components, wear a wrist-grounding
strap, available from most electronic component stores.