BBS-1080S Datasheet, PDF (49/88 Pages) BOSER Technology Co., Ltd – 19” 1U Height Half-size Bare Bone System with Pentium 4 Embedded Engine Board & 180W P4 ATX P/S

5.9 Peripheral Setup
The IDE hard drive controllers can support up to four separate hard
drives. These drives have a master/slave relationship that is
determined by the cabling configuration used to attach them to the
controller. Your system supports two IDE controllers--a primary and a
secondary--so you can install up to four separate hard disks.
Phoenix – AwardBIOS CMOS Setup Utility
Integrated Peripherals
On-chip Primary PCI IDE
IDE Primary Master PIO
[Enabled]
[Auto]
Item Help
Menu Level X
IDE Primary Slave PIO
[Auto]
IDE Primary Master UDMA
[Auto]
IDE Primary Slave UDMA
[Auto]
On-chip Secondary PCI IDE
[Enabled]
IDE Secondary Master PIO
[Auto]
IDE Secondary Slave PIO
[Auto]
IDE Secondary Master UDMA
[Auto]
IDE Secondary Slave UDMA
[Auto]
USB Controller
[Enabled]
USB 2.0 Controller
[Enabled]
USB Keyboard Support
[Disabled]
USB Mouse Support
[Disabled]
AC97 Audio
[Auto]
Init Display First
[PCI Slot]
IDE HDD Block Mode
[Enabled]
POWER ON Function
[BUTTON ONLY]
KB Power ON Password
[Enter]
Hot Key Power On
[Ctrl-F1]
Onboard FDC Controller
[Enabled]
Onboard Serial Port 1
[3F8/IRQ4]
Onboard Serial Port 2
[2F8/IRQ3]
UART Mode Select
[Normal]
RxD, TxD Active
[Hi, Lo]
IR Transmission delay
[Enabled]
UR2 Duplex Mode
[Half]
Use IR Pins
[IR-RX2TX2]
Onboard Parallel Port
[378/IRQ7]
Parallel Port Mode
[SPP]
EPP Mode Select
[EPP1.7]
ECP Mode Use DMA
[3]
PWRON After PWR-Fail
[Off]
Midi Port Address
[330]
Midi Port IRQ
[5]
Onboard Serial Port 3
[3E8]
Serial Port 3 Use IRQ
IRQ10]
Onboard Serial Port 4
[2E8]
Serial Port 4 Use IRQ
[IRQ11]
: Select Item + / - /PU/PD: Value F10: Save ESC: Quit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
41