HCPL-576X Datasheet, PDF (3/11 Pages) Agilent(Hewlett-Packard) – AC/DC to Logic Interface Hermetically Sealed Optocouplers

HCPL-576x, 5962-8947701
Data Sheet
Absolute Maximum Ratings
Parameter
Symbol
Min
Max
Unit
Notes
Storage Temperature Range
Operating Temperature
Lead Solder Temperature
Average Input Current
Surge Input Current
Peak Transient Input Current
Input Power Dissipation
Total Package Power Dissipation
Output Power Dissipation
Average Output Current
Supply Voltage (Pins 8 to 5)
Output Voltage (Pins 6 to 5)
T_S
T_A
I_IN
I_IN,SG
I_IN,PK
P_IN
P_d
P_O
I_O
V_CC
V_O
–65
+150
°C
–55
+125
°C
—
260 for 10 sec
°C
—
15
mA
a
—
140
mA
a, b
—
500
mA
a, b
—
195
mW
c
—
260
mW
—
65
mW
—
40
mA
–0.5
20V
min.
–0.5
20V
min.
a. Current into or out of any single lead.
b. Surge input current duration is 3 ms at 120 Hz pulse repetition rate. Transient input current duration is 10 μs at 120-Hz pulse repetition rate. Note that
maximum input power, P_IN, must be observed.
c. Derate linearly above 100°C free-air temperature at a rate of 4.26 mW/°C. Maximum input power dissipation of 195 mW allows an input IC junction
temperature of 150°C at an ambient temperature of T_A = 125°C with a typical thermal resistance from junction to ambient of θ_JAi = 235°C/W. The typical
thermal resistance from junction to case is equal to 170°C/W. Excessive P_IN and T_J can result in device degradation.
ESD Classification
MIL-STD-883, Method 3015
, Class 2
Recommended Operating Conditions
Parameter
Power Supply
Operating Frequency^a
Symbol
Min
Max
Unit
V_CC
3.0
f
0
18
V
10
KHz
a. Maximum operating frequency is defined when output waveform (Pin 6) attains only 90% of V_CC with R_L = 1.8 kΩ, C_L = 15 pF using a 5V square wave input
signal
Broadcom
-3-