ACPL-M61T-000E Datasheet, PDF (3/10 Pages) Broadcom Corporation. – 10MBd Wide Operating Temperature Automotive Digital Optocoupler with R2Coupler™ Isolation and AEC-Q100 Qualification

Recommended Pb-Free IR Profile
Recommended reflow condition as per JEDEC Standard, J-STD-020 (latest revision).
Note: Non-halide flux should be used.
Regulatory Information
The ACPL-M61T is approved by the following organizations:
UL
Approved under UL 1577, component recognition
program up to V_ISO = 4000 V_RMS
CSA
Approved under CSA Component Acceptance Notice #5.
IEC/EN/DIN EN 60747-5-2
Approved under:
IEC 60747-5-2:1997 + A1
EN 60747-5-2:2001 + A1
DIN EN 60747-5-2 (VDE 0884 Teil 2)
IEC/EN/DIN EN 60747-5-2 Insulation Characteristics*
Description
Symbol
Characteristic Unit
Installation classification per DIN VDE 0110/1.89, Table 1
for rated mains voltage ≤ 150 V_rms
for rated mains voltage ≤ 300 Vrms
for rated mains voltage ≤ 600 V_rms
I – IV
I – III
I – II
Climatic Classification
55/125/21
Pollution Degree (DIN VDE 0110/1.89)
2
Maximum Working Insulation Voltage
V_IORM
567
V_peak
Input to Output Test Voltage, Method b*
V_PR
V_IORM x 1.875=V_PR, 100% Production Test with t_m=1 sec, Partial discharge < 5 pC
1063
V_peak
Input to Output Test Voltage, Method a*
V_IORM x 1.6=V_PR, Type and Sample Test, t_m=10 sec, Partial discharge < 5 pC
V_PR
907
V_peak
Highest Allowable Overvoltage (Transient Overvoltage t_ini = 60 sec)
V_IOTM
6000
V_peak
Safety-limiting values – maximum values allowed in the event of a failure.
Case Temperature
T_S
175
°C
Input Current
I_{S, INPUT}
230
mA
Output Power
P_{S, OUTPUT} 600
mW
Insulation Resistance at T_S, V_IO = 500 V
R_S
>10⁹
:
* Refer to the optocoupler section of the Isolation and Control Components Designer’s Catalog, under Product Safety Regulations section, (IEC/EN/
DIN EN 60747-5-2) for a detailed description of Method a and Method b partial discharge test profiles.
Insulation and Safety Related Specifications
Parameter
Minimum External Air
Gap (Clearance)
Minimum External
Tracking (Creepage)
Minimum Internal Plastic
Gap (Internal Clearance)
Tracking Resistance
(Comparative Tracking
Index)
Isolation Group
(DIN VDE0109)
Symbol
L(101)
L(102)
CTI
ACPL-M61T Units
≥5
mm
≥5
mm
0.08
mm
175
V
IIIa
Conditions
Measured from input terminals to output terminals, shortest distance
through air.
Measured from input terminals to output terminals, shortest distance
path along body.
Through insulation distance conductor to conductor, usually the
straight line distance thickness between the emitter and detector.
DIN IEC 112/VDE 0303 Part 1
Material Group (DIN VDE 0109)
3