ACPL-M61T-000E Datasheet, PDF (1/10 Pages) Broadcom Corporation. – 10MBd Wide Operating Temperature Automotive Digital Optocoupler with R2Coupler™ Isolation and AEC-Q100 Qualification

ACPL-M61T
10MBd Wide Operating Temperature Automotive Digital Optocoupler
with R²Coupler™ Isolation and AEC-Q100 Qualification
Data Sheet
Lead (Pb) Free
RoHS 6 fully
compliant
RoHS 6 fully compliant options available;
-xxxE denotes a lead-free product
Description
This small outline wide operating temperature, high
CMR, high speed, logic gate optocoupler is a single
channel device in a five lead miniature footprint.
The ACPL-M61T optically coupled gates combine a
AlGaAs light emitting diode and an integrated high
gain photo detector. The output of the detector IC is an
Open-collector Schottky-clamped transistor. The internal
shield provides a guaranteed common mode transient
immunity specification of 15,000 V/μs at V_CM=1000V.
This optocoupler is suitable for use in automotive high
speed communications logic interfacing with low propa-
gation delays, input/output buffering and is recommend-
ed for use in high operating temperature environment.
This unique design provides maximum AC and DC circuit
isolation while achieving TTL compatibility. The optocou-
pler AC and DC operational parameters are guaranteed
from -40°C to 125°C.
Avago R²Coupler isolation products provide the rein-
forced insulation and reliability needed for critical in au-
tomotive and high temperature industrial applications.
Functional Diagram
Features
x High Temperature and Reliability CANBus communic-
ation interface for Automotive Application.
x 15 kV/Ps High Common-Mode Rejection at V_CM = 1000 V
x Compact, Auto-Insertable SO5 Packages
x Wide Temperature Range: -40°C ~ 125°C
x High Speed: 10MBd (Typical)
x Low LED Drive Current: 6.5mA (typ)
x Low Propagation Delay: 100ns (max)
x Worldwide Safety Approval:
− UL 1577, 4000 Vrms/1 min.
− CSA File CA88324, Notice #5
− IEC/EN/DIN EN 60747-5-2 Approved
x Qualified to AEC-Q100 Test Guidelines
Applications
x Automotive CANBus Communications Interface
x High Temperature Digital Signal Isolation
x Micro-controller Interface
x Digital isolation for A/D, D/A conversion
ANODE 1
CATHODE ³
6 V_CC
5 V_O
4 GND
CAUTION: It is advised that normal static precautions be taken in handling and assembly
of this component to prevent damage and/or degradation which may be induced by ESD.