DEMO-ATF-5X1P8 Datasheet, PDF (1/23 Pages) Broadcom Corporation. – High Linearity Enhancement Mode[ Pseudomorphic HEMT in 2x2 mm2 LPCC[3] Package

ATF-521P8
High Linearity Enhancement Mode ^[1] ­Pseudomorphic HEMT
in 2x2 mm² LPCC^[3] ­Package
Data Sheet
Description
Avago Technologies’ ATF‑521P8 is a single-voltage high
linearity, low noise E‑pHEMT housed in an 8-lead JEDEC-
standard leadless plastic chip carrier (LPCC^[3]) package.
The device is ideal as a medium-power, high-linearity
amplifier. Its operating frequency range is from 50 MHz
to 6 GHz.
The thermally efficient package measures only 2mm
x 2mm x 0.75mm. Its backside metalization provides
excellent thermal dissipation as well as visual evidence
of solder reflow. The device has a Point MTTF of over
300 years at a mounting temperature of +85°C. All
devices are 100% RF & DC tested.
Pin Connections and Package Marking
Pin 8
Pin 7 (Drain)
Pin 6
Pin 5
Pin 1 (Source)
Pin 2 (Gate)
Pin 3
Pin 4 (Source)
Features
• Single voltage operation
• High linearity and P1dB
• Low noise figure
• Excellent uniformity in product specifications
• Small package size: 2.0 x 2.0 x 0.75 mm³
• Point MTTF > 300 years^[2]
• MSL-1 and lead-free
• Tape-and-reel packaging option available
Specifications
• 2 GHz; 4.5V, 200 mA (Typ.)
• 42 dBm output IP3
• 26.5 dBm output power at 1 dB gain compression
• 1.5 dB noise figure
• 17 dB Gain
• 12.5 dB LFOM^[4]
Bottom View
Pin 1 (Source)
Pin 8
Pin 2 (Gate)
Pin 3
2Px
Pin 7 (Drain)
Pin 6
Pin 4 (Source)
Pin 5
Top View
Note:
Package marking provides orientation and identification
“2P” = Device Code
“x” = Month code indicates the month of manufacture.
Note:
1. Enhancement mode technology employs a single positive V_gs,
eliminating the need of negative gate voltage associated with
conventional depletion mode devices.
2. Refer to reliability datasheet for detailed MTTF data
3. Conform to JEDEC reference outline MO229 for DRP-N
4. Linearity Figure of Merit (LFOM) is essentially OIP3 divided by DC
bias power.
Applications
• _{Front-end LNA Q2 and Q3, driver or pre-driver amplifier}
for Cellular/PCS and WCDMA wireless infrastructure
• _{Driver amplifier for WLAN, WLL/RLL and MMDS applica‑}
tions
• _{General purpose discrete E-pHEMT for other high linear‑}
ity applications
Attention: Observe precautions for
handling electrostatic ­sensitive devices.
ESD Machine Model (Class A)
ESD Human Body Model (Class 1C)
Refer to Avago Technologies Application Note
A004R: Electrostatic Discharge Damage and Control.