8151 Datasheet, PDF (2/4 Pages) Bi technologies – Position Sensor

Model 8150
ENVIRONMENTAL
Operating Temperature Range
-40°C to +125°C
Shock
Per MIL R-39023, 6 ms Saw-tooth 100 G’s
Vibration
Per MIL R-39023, 10 G’s, 100 to 500 Hz
Moisture Resistance, Powered
Per MIL 202G, Method 106G
Rotational Life
8153: 50 million shaft revolutions with side load < 0.33 lb, 100 million with side load < 0.25 lb
all other models: 10 million shaft revolutions with up to 8 oz side load
Storage Temperature Range
-55°C to +125°C
Ingress Protection Rating (IP Code)
IP50, IP66 available as option (feature code ES)
ORDERING INFORMATION
8150 V1 T10 L.5 XX
Model Series
Voltage Output Code (see table)
Number of turns (3, 5, and 10 are standard)
Optional Feature Code (see table)
No code required for slotted shaft 8154/8156
or for plain shaft 8151/8153
Linearity, Independent
CODES
Voltage Output Codes
V0
≤ 3% to ≥ 96%
V1
4% to 96%
V2
5% to 95%
V3
10% to 90%
V4
15% to 85%
V5
20% to 80%
When V0 is used the angle specified is
the theoretical angle over which the
output would vary if the output could
actually reach 0% and 100% of Vcc.
no code
Optional Feature Codes
8151, 8153 plain shaft. 8154, 8156 slotted shaft
SS
Slotted Shaft (8151, 8153 only. Not used for 8154, 8156)
FS
Flatted Shaft
LT
Linearity Data
SL
Shaft Lock (8156 only)
CW
Reverse Direction
HT
High Torque (8156 only)
ES
Seal IP66 (8154, 8156 only)
When multiple feature codes are used the P/N shall be in the
same sequence as listed in this table (top to bottom).
BI Technologies Corporation
4200 Bonita Place, Fullerton, CA 92835 USA
Phone: [phone] Website: www.bitechnologies.com
February 16 2016
Model 8150 page 2 of 4