6153 Datasheet, PDF (2/3 Pages) Bi technologies – Position Sensor

Model 6150 series
ENVIRONMENTAL
Operating Temperature Range
-40°C to +125°C
Shock
Per MIL R-39023, 6 ms Saw-tooth 100 G’s
Vibration
Per MIL R-39023, 10 G’s, 100 to 500 Hz
Moisture Resistance, Powered
Per MIL 202G, Method 106G
Rotational Life
50 million shaft revolutions with side load < 0.33 lb, 100 million with side load < 0.25 lb
Storage Temperature Range
-55°C to +125°C
Ingress Protection Rating (IP Code)
IP50
ORDERING INFORMATION
6153 V1 A360 L.5 XX
Model Series
Voltage Output Code (see table)
Electrical Angle (35 to 360 degrees,
smaller angles are possible, consult factory)
Optional Feature Code
(see table)
Linearity, Independent
FEATURE CODES
Voltage Output Codes
V0
≤ 3% to ≥ 96%
V1
4% to 96%
V2
5% to 95%
V3
10% to 90%
V4
15% to 85%
V5
20% to 80%
Optional Feature Codes
FS
Flatted Shaft
SS
Slotted Shaft
LT
Linearity Data
CW
Reverse Direction
When V0 is used the angle specified is the
theoretical angle over which the output
would vary if the output could actually reach
0% and 100% of Vcc.
When multiple Optional Feature codes are used
the P/N shall be in the same sequence as listed
in this table (top to bottom).
BI Technologies Corporation
4200 Bonita Place, Fullerton, CA 92835 USA
Phone: [phone] Website: www.bitechnologies.com
September 24, 2013
Model 6150 Series page 2 of 3