6153 Datasheet, PDF (1/3 Pages) Bi technologies – Position Sensor

Model 6150 Series
7/8” Diameter
Single Turn
Non-contacting
Position Sensor
MODEL STYLES AVAILABLE
6153
615x-XXXX
1/8” Shaft, dual ball bearing
Custom models are available; Contact Customer Service for special features
ELECTRICAL¹
Output Voltage
0.2 Vdc (4%) to 4.8 Vdc (96%) Typical (see Feature Codes table)
Output Overvoltage Limits
10 Vdc to -0.3 Vdc; output may be shorted to ground or supply without damage
Output Current
±8 mA maximum
Output Load
1 kΩ minimum, 10 kΩ typical
Input Voltage
4.5 to 5.5 Vdc
Supply Voltage Absolute Limits
20 Vdc maximum, -10 Vdc minimum
Independent Linearity²
±0.5% (0.25% available)
Hysteresis
0.2% maximum
Resolution
0.088° for 360° travel, 0.011° for 45° travel
Supply Current
8.5 mA typical, 12 mA maximum
Dielectric Strength
750 V rms
Insulation Resistance
1,000 Megohms minimum
Electrostatic Discharge (ESD)
Passes 2 kV human body model and 15 kV air discharge
Bulk Current Injection (BCI)
Passes 2-500 MHz at 200 mA
Actual Electrical Travel
360° typical (see Ordering Information)
Temperature Coefficient of Output Voltage³
± 20 ppm/°C
MECHANICAL
Total Mechanical Travel
Number of Gangs
Weight
Shaft Runout
Pilot Diameter Runout
Lateral Runout
Shaft Radial Play
Start/Run Torque
Rotational Speed
1 _{Specifications subject to change without notice.}
2 _{Linearity is measured between 1% and 99% of input voltage.}
3 _{Measured with 5 VDC supply and 50% of electrical travel}
BI Technologies Corporation
4200 Bonita Place, Fullerton, CA 92835 USA
Phone: [phone] Website: www.bitechnologies.com
September 24, 2013
Model 6150 Series page 1 of 3
360° continuous
1 maximum
0.4 oz. nominal
maximum T.I.R. 0.003”
maximum T.I.R. 0.003”
maximum T.I.R. 0.003”
maximum 0.005”
maximum 0.5 oz.-in.
maximum 1,000 RPM
Pb RoHS 2
compliant