6121 Datasheet, PDF (2/3 Pages) Bi technologies – Position Sensor

Model 6120
ENVIRONMENTAL
Operating Temperature Range
Shock
Vibration
Moisture Resistance, Powered
Rotational Life
Storage Temperature Range
Ingress Protection Rating (IP Code)
-40°C to +125°C
Per MIL R-39023, 6 ms Saw-tooth 100 G’s
Per MIL R-39023, 10 G’s, 100 to 500 Hz
Per MIL 202G, Method 106G
10 million shaft revolutions with up to 8 oz sideload
-55°C to +125°C
IP50, IP66 available as option (feature code ES)
ORDERING INFORMATION
6127 V1 A360 L.5 XX
Model Series
Voltage Output Code (see table)
Electrical Angle (35 to 360 degrees,
smaller angles are possible, consult factory)
Optional Feature Code
(see table)
Linearity, Independent
FEATURE CODES
Voltage Output Codes
V0
≤ 3% to ≥ 96%
V1
4% to 96%
V2
5% to 95%
V3
10% to 90%
V4
15% to 85%
V5
20% to 80%
When V0 is used the angle specified is the
theoretical angle over which the output
would vary if the output could actually reach
0% and 100% of Vcc.
Optional Feature Codes
ST
Stop (320°)
FS
Flatted Shaft (slot standard)
LT
Linearity Data
SL
Shaft Lock 6127 only
CW
Reverse Direction
ES
Seal (IP66) 6124 or 6127 only
When multiple Optional Feature codes are used
the P/N shall be in the same sequence as listed
in this table (top to bottom).
BI Technologies Corporation
4200 Bonita Place, Fullerton, CA 92835 USA
Phone: [phone] Website: www.bitechnologies.com
February 19, 2015
Model 6120 page 2 of 3