6121 Datasheet, PDF (1/3 Pages) Bi technologies – Position Sensor

Model 6120
Position Sensor
7/8” Diameter
Non-Contacting Hall Effect
Single Turn
MODEL STYLES AVAILABLE
6121
6124
6126
6127
612x-XXXX
1/8” Shaft, 1/4” Bushing
6 mm Shaft, 3/8” Bushing
1/8” Shaft, 3/8” Bushing
1/4” Shaft, 3/8” Bushing
Custom models are available; Contact Customer Service for special features
ELECTRICAL¹
Output Voltage
Output Overvoltage Limits
Output Current
Output Load
Operating Input Voltage Range
Supply Voltage Absolute Limits
Independent Linearity²
Hysteresis
Resolution
Supply Current
Dielectric Strength
Insulation Resistance
Electrostatic Discharge (ESD)
Bulk Current Injection (BCI)
Actual Electrical Travel
Temperature Coefficient of Output Voltage
0.2 Vdc (4%) to 4.8 Vdc (96%) Typical (see Feature Codes table)
10 Vdc to -0.3 Vdc; output may be shorted to ground or supply without damage
±8 mA Max.
1 kΩ Min., 10 kΩ Typical
4.5 to 5.5 Vdc
20 Vdc Max., -10 Vdc Min.
±0.5% (0.25% Available)
0.2% Max.
0.088° for 360° travel, 0.011° for 45° travel
8.5 mA Typical, 12 mA Max.
750 V rms
1,000 MegΩ Min.
Passes 2 kV human body model and 15 kV air discharge
Passes 2-500 MHz at 200 mA
360° Typical (see Ordering Information)
± 20 ppm/°C
MECHANICAL
Total Mechanical Travel
Bearing
Weight
Static Stop Strength
Panel Nut Tightening Torque
Rotational Speed
1 _{Specifications subject to change without notice.}
2 _{Linearity is measured between 1% and 99% of input voltage.}
BI Technologies Corporation
4200 Bonita Place, Fullerton, CA 92835 USA
Phone: [phone] Website: www.bitechnologies.com
February 19, 2015
Model 6120 page 1 of 3
360° Continuous (320° with stop feature)
Bearing Bronze Bushing
0.6 oz. Typical
40 in. oz.
25 in. lb. Max.
500 RPM Max.
Pb RoHS 2
compliant