GMDC12V08 Datasheet, PDF (7/7 Pages) Bel Fuse Inc. – DORADO MV DC/DC CONVERTERS

DORADO MV DC/DC CONVERTERS
24V Input – 12VDC – 8A Output
Mechanical
GMDC12V08
POWER PRODUCTS
GMDC12V08
Pin Configuration – Bottom View
Pin
Function
Pin Dia. (In.)
1
+ Input
0.040
2
On/Off
0.040
3
– Input
0.040
4
– Output
0.060
5
– Sense
0.040
6
Trim
0.040
7
+ Sense
0.040
8
+ Output
0.060
Notes:
1. Mechanical tolerances
x.xxx in. = ± 0.005 in.
x.xx in = ± 0.01 in.
2. Pin material: Brass with tin/lead plating over nickel
3. Workmanship: Meets or exceeds IPC-A-610B Class II
4. "A" = 0.040" dia. pins
5. "B" = 0.060" dia. pins
6. Min. screw length for heat sink attachment
= 4.5mm + heat sink flange + locking hardware
RoHS Compliance
Complies with the European Directive 2002/95/EC, calling for the elimination of lead and other
hazardous substances from electronic products. These parts are not however compatible with
the higher temperatures associated with lead free solder processes and must be soldered using
a reflow profile with a peak temperature of no more than 240_˚C.
CORPORATE
Bel Fuse Inc.
206 Van Vorst Street
Jersey City, NJ 07302
Tel [phone]
Fax [phone]
www.belfuse.com
FAR EAST
Bel Fuse Ltd.
8F / 8 Luk Hop Street
San Po Kong
Kowloon, Hong Kong
Tel [phone]
Fax [phone]
www.belfuse.com
©2006 Bel Fuse Inc. Specifications subject to change without notice. 11.06
EUROPE
Bel Fuse Europe Ltd.
Preston Technology Management Centre
Marsh Lane, Suite G7, Preston
Lancashire, PR1 8UD, U.K.
Tel [phone]
Fax [phone]
www.belfuse.com
page 7