SRBA-06A1AX Datasheet, PDF (3/6 Pages) Bel Fuse Inc. – NON-ISOLATED DC/DC CONVERTERS

NON-ISOLATED DC/DC CONVERTERS
8.3 V-14 V Input 0.75 V-5.0 V/6 A Output
Control Specifications
Parameter
Remote On/Off
Signal Low (Unit Off)
Signal High (Unit On)
Signal Low (Unit On)
Signal High (Unit Off)
Min
Typ
-0.3 V
-
2.5 V
-
-0.3 V
-
2.5 V
-
Max
Notes
0.4 V
14 V
0.4 V
14 V
SRBA-06A1A0; Remote On/Off pin open, Unit
on.
SRBA-06A1AL; Remote On/Off pin open, Unit
on.
Output Trim Equations
Equation for calculating the trim resistor (in kΩ) given the desired adjusted voltage (Vadj) is shown below. The
Trim Up resistor should be connected between the Trim pin and Ground.
R_trim
=
10.507
V_adj − 0.7525
−
1
Vout
Module ^Trim
GND
Rtrim
Equation for calculating the trim voltage (in V) given the desired adjusted voltage (Vadj) is shown below. The
Trim Up voltage should be connected between the Trim pin and Ground.
V_trim = 0.7 − 0.0667 × (V_adj − 0.7525)
Vout
Module _Trim
GND
Vtrim
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel [phone] • Fax [phone] • WWW.belfuse.com