English
Language : 

SRBA-06A1AX Datasheet, PDF (1/6 Pages) Bel Fuse Inc. – NON-ISOLATED DC/DC CONVERTERS
NON-ISOLATED DC/DC CONVERTERS
8.3 V-14 V Input 0.75 V-5.0 V/6 A Output
SRBA-06A1Ax Series
• Non-Isolated
• High Efficiency
• High Power Density
• Fixed Frequency
• Remote On/Off
RoHS Compliant
• Under-Voltage Lockout (UVLO)
• OCP/SCP
• Wide Input Range
• Wide Output Trim Range
• Active Low/High
Description
The Bel SRBA-06A1Ax modules are a series of non-isolated dc/dc converters that deliver up to 6 A of output
current with full load efficiency of 92% at 5.0 V output. These modules pro Vide precisely regulated Voltage
programmable via external resistor from 0.75 V to 5.0 V over a wide range of input voltage (8.3 V-14 V). The
open-frame construction and small footprint enable designers to develop cost and space-efficient solutions.
Standard features include remote On/Off, over current protection, short current protection, wide input, and
programmable output voltage.
Part Selection
Output
Input
Voltage
Voltage
0.75 V - 5.0 V 8.3 V - 14 V
Max. Output Max. Output
Current
Power
6A
30.0 W
Typical
Efficiency
92%
Model Number
Active Low
SRBA-06A1AL
Note: Add “G” suffix at the end of the model number to indicate Tray Packaging.
Model Number
Active High
SRBA-06A1A0
Absolute Maximum Ratings
Parameter
Min
Typ
Input Voltage (continuous)
-0.3 V
-
Output Enable Terminal Voltage
-0.3 V
-
Ambient Temperature
-40 °C
-
Storage Temperature
-55 °C
-
Max
15 V
15 V
85 °C
125 °C
Notes: All specifications are typical at 25 °C unless other Wise stated.
Notes
Input Specifications
Parameter
Input Voltage
Input Current (full load)
Input Current (no load)
Remote Off Input Current
Vo=5.0 V
Vo=3.3 V
Vo=2.5 V
Vo=1.8 V
Vo=1.2 V
Vo=0.75 V
Vo=5.0 V
Vo=0.75 V
Input Reflected Ripple Current (pk-pk)
Input Reflected Ripple Current (rms)
I2t Inrush Current Transient
Turn-on Voltage Threshold
Turn-off Voltage Threshold
Min
8.3 V
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Typ
12 V
2.75 A
1.85 A
1.45 A
1.05 A
0.75 A
0.55 A
-
-
1 mA
120 mA
40 mA
0.002 A2s
8.1 V
7.5 V
Max
14 V
Notes
4.0 A
2.8 A
2.2 A
1.6 A
1.1 A
0.8 A
100 mA
20 mA
2 mA
-
-
0.02 A2s
8.2 V
8.0 V
Tested with two 100 uF/25 V tantalum
input capacitors & simulated source
impedance of 1 uH, 5 Hz to 20 MHz.
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • WWW.belfuse.com